Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Borough Park
If you’re searching for chimney repair in Borough Park, NY, here’s the short answer: most repair work here starts with a camera inspection of the flue, not a sweep, because the chimneys in this neighborhood were built for coal, not gas. The vast majority of Borough Park chimneys we look at tie into buildings from the 1900s through the 1930s, and many of those original flues now vent gas boilers and water heaters they were never designed for. That’s why we diagnose first, show you the video, and only then talk about a fix. Call (866) 937-8201 to book an inspection.

Our technicians have up to 11 years of experience with exactly this kind of masonry. We work throughout Borough Park and the surrounding blocks, and we know the housing stock here well enough to recognize a party-wall moisture problem before we open a single joint.
Why Borough Park Homeowners Call Chimney Sweep Sunset Park for Chimney Repair
Borough Park’s chimneys don’t fail the way suburban fireplaces do. Here the work is dominated by brick tenements, two-family rowhouses, and the schools, shuls, and shtiebels that make up so much of the neighborhood, where coal-era flues now carry gas exhaust. We understand that difference, and we plan accordingly. If you call us about a draft problem, we’re checking liner sizing and appliance venting, not just brushing creosote out of a wood-box.
We’ve built our reputation in Borough Park by diagnosing before we quote. No surprise add-ons once the camera comes back up the flue. Every recommendation we make is backed by footage you can see and review yourself before any work is authorized. And when we can safely wait on a repair, we tell you to wait.
Response to Borough Park is prompt. We answer the phone 24/7, and we dispatch Sunday through Friday, 7am to 7pm. Same-day inspection is available when the schedule allows. We work on the deep-lot blocks off 13th and 16th Avenues and the tighter side streets around 50th Street with the same care we’d want in our own home.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Borough Park
Everything from the firebox to the crown, handled by the same team that did the inspection. That means your findings aren’t handed off to a subcontractor. Read more about our full chimney repair work if you want the wider picture.
Mortar Repointing in Borough Park
Repointing is the most common repair we do on Borough Park’s 1900s-1930s brick. Deteriorated mortar joints let water in, and once it freezes in a November cold snap, the brick face starts to pop. We grind out the failing joints and repack them with fresh mortar matched to the age and color of the original brick, so a patched chimney doesn’t look patched.
Spalling Brick Repair in Borough Park
Spalling shows up here most often on the shaded north side of a chimney and along shared party walls, where the masonry stays damp longest. That moisture freezes and thaws through the winter, and the outer face of the brick flakes off. We remove the deteriorated brick, replace it with sound masonry, and address the water source that caused it.
Chimney Waterproofing in Borough Park
Waterproofing is the repair people skip and then regret. On a Borough Park brick chimney that’s already got some face spalling, a breathable sealant stops liquid water from soaking in while letting the masonry dry from the inside out. That’s the difference between slowing the decay and trapping moisture where it does more damage.
Flashing Repair in Borough Park
Flashing failures on the roof line are behind a lot of the moisture we find inside Borough Park chimneys. A flashing that’s pulled loose or cracked lets rain run straight down the masonry, and patching the brick without fixing the flashing just leads to repeat decay next season. We correct the flashing at the roof juncture first, then repair the masonry it damaged.
Trusted Brands We Service in Borough Park
We name the brands we install, because the materials matter as much as the labor. Our work with DuraFlex covers flexible metal liner replacement, sized and fitted to the appliance. For flue resurfacing where the liner is compromised but the structure is sound, we work with HeatShield, which lets us restore a flue rather than tear it out. Where a full rebuild or new cap and crown is required, we install Olympia Chimney and Gelco components. Professional-grade parts, not hardware-store generics. Fast turnaround on the inspection-to-repair timeline, without a second contractor needed.

Common Chimney Repair Problems We See in Borough Park Homes
The buildings here have a specific set of failure modes, and they tend to repeat across the neighborhood.
- Boiler and water heater sharing one original coal flue. This is the classic Borough Park setup: a gas boiler plus a water heater tapped into a single unlined stack. During the heating season that undersized flue can’t draft properly, and you get exhaust spillage and CO alarms. A sweep has to detect and correct this, not brush around it.
- Spalling brick on shaded north-side chimneys and party walls. The dense masonry construction here holds moisture, so the north face and party-wall sections decay first. The problem often goes unnoticed until a Level 2 inspection camera shows gaps that admit water and flue gases.
- Crown and flashing failures that let water in. When a crown cracks or flashing pulls loose, moisture enters the masonry, freezes, and causes face spalling. Patching without fixing the crown or flashing means the decay just repeats.
- Draft problems misdiagnosed as appliance faults. Backdrafting and CO complaints get blamed on a bad boiler or water heater when the real issue is a flue that’s undersized or unlined for the appliance load. The chimney is usually the cause, and the repair is usually the liner.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Borough Park, NY
We quote per job, by written estimate, and the estimate is free. These ranges give you a realistic starting point for the Borough Park market. Mortar repointing typically runs $15-$35 per square foot of joint area, depending on how much of the chimney face needs work. Spot spalling brick repair usually lands between $400 and $1,500 for small sections. Chimney waterproofing is generally $250-$600 for a standard residential chimney. Flashing repair runs $300-$900, and a partial rebuild can run $2,000-$6,000 or more where the upper masonry has failed. What pushes a job toward the high end is access, height, and how much hidden decay the camera finds once we’re up there.
Our commitment: nothing is recommended without camera evidence you can review yourself. If a repair can safely wait until after the heating season, we’ll say so plainly. Call (866) 937-8201 for a free estimate.
We Also Serve Cities Near Borough Park
Borough Park sits alongside some of the same age and building type. We also work in Sunset Park, where you’ll find similar 1900s-1930s brick rowhouses. We serve Kensington to the east, Dyker Heights to the south, and Bensonhurst beyond that. Same team, same inspection-first approach in each. Call and we’ll talk through your building and the right next step.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Borough Park
Not without a properly sized liner. Sharing an original coal flue between a boiler and a water heater is the most common venting problem we see in Borough Park, and it often fails a draft test. The fix is usually a correctly sized liner for each appliance, verified by camera before it’s installed. Call (866) 937-8201 for an exact quote. Estimates are free.
A Level 2 inspection covers the entire flue with a camera, checking liner condition, mortar joints, and appliance connections. On a 1920s Borough Park rowhouse, the original flue was never meant for the gas boiler now venting into it, and only a camera reveals the gaps and deterioration you can’t see from the roof. Call us to book one. Estimates are free.
Repointing is the answer when the brick itself is sound and only the mortar joints have failed; a rebuild is needed when the brick face is spalling or the upper courses are unstable. The camera and the physical inspection tell us which. We show you the evidence and explain the difference before you authorize anything. Call (866) 937-8201 for a free estimate.
That pattern usually points to a draft failure, not a boiler fault. An undersized or unlined flue can’t carry the exhaust away, so it spills back into the building when the boiler fires. This is exactly the situation a Borough Park camera inspection is designed to find. Call (866) 937-8201. Estimates are free.
Yes, once the spalling brick is repaired. Waterproofing on intact brick slows the moisture cycle that causes face spalling in the first place. On already-spalled masonry it needs to follow the brick repair, not replace it. We’ll tell you the right order. Call (866) 937-8201 for an exact quote.
Call Chimney Sweep Sunset Park for Borough Park Chimney Repair
If your Borough Park building has a draft problem, a spalling chimney, or a boiler and water heater sharing a stack that was never designed for them, we’ll come out, run the camera, and show you what’s actually happening. Nothing gets recommended without video evidence you can review. Whether it’s mortar repointing, spalling brick, waterproofing, or flashing, the fix is based on what the inspection finds. Call (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm.
Written by the team at Chimney Sweep Sunset Park.