Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Midwood
Chimney inspection in Midwood typically runs $175 – $450, and the visit often ends up telling you more about your basement than your fireplace. That’s the reality in this part of Brooklyn. Most of the calls we take here start with a two-family house built between 1920 and 1940, a brick exterior stack, and a heating system that’s been swapped out twice since the chimney was laid. A proper inspection reads the whole system, from the boiler flue connection in the basement to the crown on the roof. Our technicians have up to 11 years of experience with exactly this kind of housing, and we know Midwood’s side streets, its shared driveways, and the mechanical rooms that hide behind them. Call (866) 937-8201 and we’ll book a sweep and inspection together so nothing gets missed.

Why Midwood Homeowners Call Chimney Sweep Sunset Park for Chimney Inspection
We connect Midwood homeowners with independent local professionals who work these brick two-families regularly, and that matters here. An inspector who only sweeps fireplaces will walk past the real issue: a gas boiler and water heater venting into a 1930s clay-tile flue that was built for coal. Our inspection work in Midwood starts in the basement for that reason, then moves up.
We’re upfront about what we don’t do. We don’t sell liners on sight of old brick. Nothing gets recommended until the camera has run the flue and you’ve watched the footage yourself. That’s not a sales line, it’s how a diagnostic inspection is supposed to work, and it’s why homeowners who’ve been quoted thousands elsewhere call us for a second look. The local pro we connect you with is licensed and insured as their state requires, and the flat-price sweep is agreed before booking, so you know what the visit costs before anyone arrives.
Response time to Midwood is straightforward. We answer 24/7, and fast dispatch runs 7am to 7pm. Our chimney inspection service covers routine annual checks and real-estate transaction inspections, and we handle the repair work the inspection uncovers rather than handing you off to a second contractor.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Midwood
Level 2 Inspection
In Midwood, a Level 2 inspection is what most two-family houses actually need, not the annual Level 1 sweep. It covers everything a Level 1 does plus the accessible portions of the flue interior, the attic and crawl spaces, and the connections between appliances and the chimney. When the boiler, water heater and fireplace all meet in one shared stack, that extra scope is the whole point. This is also the inspection a buyer’s lender or a real-estate contract usually calls for.
Camera Inspection
A camera run through each flue is how we show you spalling mortar, cracked tile joints, gaps at the thimble, and first-degree creosote or heavier glaze a brush alone won’t clear. In Midwood’s shared stacks, one flue can be sound while the one beside it is shedding tile into the smoke chamber. You watch the screen, and we explain what’s on it. Camera inspection and a photo report are included with the visit, not sold as an add-on.
Flue Inspection
A dedicated flue inspection checks draft, sizing and the condition of each flue separately, which matters when your chimney is an orphaned flue serving only a water heater. An undersized flue for a modern boiler vents poorly and can spill exhaust gas back into the mechanical room. We measure the appliance input against the flue it’s connected to and tell you plainly whether it’s safe to keep using as is.
Level 3 Inspection
Level 3 is a diagnostic inspection, reserved for a known or suspected problem: a chimney fire, a collapsed liner, or damage uncovered during a Level 2. It may involve opening a wall or removing part of the chimney to see concealed sections, so we discuss the scope and cost with you before anything is opened. On Midwood’s aging exterior stacks, this is a rare step, but it’s the honest one when the evidence points there.
Why a Midwood Chimney Visit Often Starts in the Basement
Here’s what makes chimney work in Midwood different from most of Brooklyn. The chimney on the roof frequently has nothing to do with the fireplace below. In 1920s and 1930s two-family houses, the original flues were built for oil or coal furnaces. Most of these homes have since converted to gas heat, and the fireplace may be sealed or abandoned entirely while the operating flue serves only a basement boiler and water heater left in an unlined coal-era tile flue never intended for gas venting. A sweep who climbs straight to the roof and sweeps a dead fireplace has inspected the wrong thing.
So a typical call goes like this: a technician checks the basement boiler and water heater connection to the shared stack first, looks for spillage at the draft hood and the thimble, then runs a camera through each flue in the stack before going up. The fix that usually follows pairs a listed liner, DuraFlex or HeatShield depending on the flue’s condition, with crown and mortar repair on the exterior brick, sized to what actually vents through the flue today. Not a fireplace. The appliance. That distinction is the whole inspection.

Common Chimney Inspection Problems We See in Midwood Homes
- Gas appliances in an unlined flue. An orphaned boiler or water heater venting into a 1930s clay-tile flue can spill carbon monoxide into the mechanical room when draft is poor. The connection needs to be checked before anything else is looked at.
- Freeze-thaw damage on the crown and mortar. Midwood’s cold winters and freeze-thaw cycles crack crown caps and mortar joints on old exterior brick, and water gets into the stack. What looks like a cleaning problem is often a cracked crown driving spalling and efflorescence.
- Cracked or spalling clay tile. Decades of heating and cooling split tile joints and shed mortar into the flue, which a camera picks up and a brush does not. A homeowner should see that footage before agreeing to a liner.
- Creosote glaze from fireplace use. Homes that still burn wood build first-degree creosote and heavier glaze that a standard sweep won’t fully remove. Heavier buildup is a chimney fire risk and needs to be addressed, not swept over.
See the difference
Before
After
Before
After
Before
AfterTrusted Brands We Service in Midwood
When an inspection turns up a flue that needs relining or resurfacing, the material matters as much as the labor. We name the brands we install because we think you should know what’s going into your chimney. That includes DuraFlex flexible liner systems for full replacements, HeatShield for flue resurfacing, and Olympia Chimney and Gelco components for caps, crowns and terminations. These are professional-tier products, not hardware-store generics. We source them for your specific flue rather than keeping a warehouse of parts, and when a Midwood inspection shows a liner is the right call, we measure and install it ourselves instead of passing the job to a subcontractor.
Pricing for Chimney Inspection in Midwood, NY
What you’ll pay for a chimney inspection in Midwood depends on the level of inspection and how many flues are in the stack. A typical Level 1 chimney inspection in Midwood runs $175 – $275. A Level 2 inspection, the one most of these two-family houses actually need, runs $275 – $450. A camera inspection bundled into a sweep visit usually runs $150 – $250 on its own. A Level 3 diagnostic inspection runs $450 – $900 and up depending on how much has to be opened up. If the inspection calls for repair, a HeatShield flue resurfacing runs roughly $1,800 – $3,500 and a DuraFlex liner replacement runs $2,800 – $6,000 depending on flue size and appliance. The written estimate sets the final price, nothing is added after a technician arrives, and the estimate itself is free. Call (866) 937-8201 for yours.
We Also Serve Cities Near Midwood
Chimney inspection work takes us across this part of Brooklyn, and the housing stock shifts from one neighborhood to the next. Alongside Midwood, we serve homeowners in Flatlands, Kensington, Bensonhurst and Flatbush, each with its own mix of brick two-families, apartment buildings and older exterior stacks. If you’re just over the line from Midwood, the same inspection and repair service applies, and we’ll confirm your area when you call.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Midwood
Because a Level 1 sweep only covers the readily accessible parts of the flue, and in a Midwood two-family the operating flue is usually a shared stack serving a basement boiler and water heater rather than a fireplace. The Level 2 inspection runs a camera through each flue and checks the appliance connections, which is where the real problems show up. Call (866) 937-8201 and we’ll book the right level for your house.
Not necessarily, and it needs a flue inspection to know. Gas appliances venting into an unlined clay-tile flue built for coal can spill exhaust back into the mechanical room when draft is poor, which is a carbon monoxide concern. A camera and draft check will tell you whether the flue needs a listed liner. Call (866) 937-8201 for an inspection before another heating season.
Yes, on older exterior brick stacks it’s common, and freeze-thaw cycles through Midwood’s cold winters are usually the cause. Spalling and efflorescence often trace back to a cracked crown letting water into the stack, which is a repair rather than a cleaning problem. We check the crown and mortar on every inspection. Call (866) 937-8201 to have yours looked at.
It shows you the inside of each flue: cracked and spalling tile, gaps at the thimble and joints, and any creosote glaze the brush won’t clear. You watch the same screen the technician does, so a recommendation for a liner is backed by footage you can see rather than old brick on sight. That’s the standard we hold to in Midwood. Call (866) 937-8201 to schedule.
Yes, a Level 2 inspection is exactly what a real-estate transaction calls for, and we can provide a camera inspection and photo report for the buyer, seller or both. Midwood’s older two-families often turn up unlined flues and abandoned fireplaces during a sale, so it’s worth inspecting before closing. Call (866) 937-8201 to get it booked.
If you own a Midwood two-family and you’re not sure what’s actually venting through your chimney, that’s the question an inspection answers. We’ll check the basement flue connection, run a camera through each flue, and show you what we find before anything is recommended. The local pro is licensed and insured as their state requires, the flat-price sweep is agreed before booking, and the estimate is free. Call (866) 937-8201. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.