Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Kensington
If you own one of Kensington’s old frame Victorians, your chimney cap and crown take more weather than almost any chimney in Brooklyn. We handle cap installation, replacement, crown repair and coating for these houses, and we know what an exposed exterior stack goes through here. When water gets into a crown and the first freeze hits, the damage starts the same week. Call (866) 937-8201 and we’ll book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Kensington Homeowners Call Chimney Sweep Sunset Park for Chimney Cap & Crown
Kensington is Victorian frame-house chimney country in a borough of brick and brownstone, and that shapes every cap and crown job here. The chimneys on these 1890s to 1920s houses run up exposed exterior walls, so brick and mortar above the roofline take the full freeze-thaw cycle every winter. Owners a few blocks toward the brownstone streets never face this.
Our technicians have up to 11 years of experience, which means they’ve seen a lot of cracked, wrong-pitched crowns on stacks exactly like yours. We diagnose before we quote, so nothing gets added after we’ve looked at the whole chimney. And the local pro we connect you with is licensed and insured as the state requires.
We use professional-grade brands – DuraFlex liners, HeatShield flue resurfacing, Gelco and Olympia Chimney components – because the materials matter as much as the labor. The written estimate sets the final price, and it’s free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Kensington
Cap Installation
A new cap keeps rain, squirrels and nesting birds out of your Kensington flues. On these frame houses the stack often has more than one flue opening, so we measure each one and fit a cap that covers all of them, not just the flue you actually burn in.
Cap Replacement
Old single-flue caps rust through or blow loose. We pull the failed cap off your Kensington chimney and set a properly sized replacement, checking the flue tile edges while the top is open. It’s a small job that stops a bigger one.
Crown Repair
The crown is the slab that sheds water off the top of the stack. On Kensington’s exterior stacks the original crown is often hairline-cracked and pitched flat or wrong, so meltwater soaks straight into the brick. We rebuild or re-pour the crown to a proper slope so water runs off instead of freezing inside the masonry.
Crown Coating
When the crown is sound but weathered, a coating seals the surface and buys years before a rebuild. We prep the top and apply a coating suited to the masonry, then check the brick faces above the roofline for spalling. This is a good fit for a Kensington stack that’s still holding together.
All of this sits under our Chimney Cap & Crown service, and the same team that inspects the flue handles the repair, so nothing gets handed off.

Trusted Brands We Service in Kensington
We name the brands we install, because on a Kensington chimney the cap and crown are only half the job. If the flue itself is compromised, that gets addressed too. We work with DuraFlex flexible liner systems for full replacements, HeatShield for flue resurfacing, and Gelco and Olympia Chimney for caps and top components. These are the materials commercial and restoration contractors use, not hardware-store generics. We don’t claim to stock parts locally – we source them and come back to fit them.
Common Chimney Cap & Crown Problems We See in Kensington Homes
- Original crowns, cracked and pitched wrong. On an exposed exterior stack, a flat crown lets water in all winter, and freeze-thaw then spalls brick faces and mortar onto the roof and yard by spring.
- Single-flue caps on a multi-flue Victorian stack. A cap sized for one flue leaves the open side flues exposed to rain, squirrels and nesting birds, which is the most common gap we find up top.
- Heavy wood-stove creosote. Many Kensington homes burn a wood stove hard through the cold months, and the flue loads up with creosote – sometimes glazed, third-degree – that a cheap cap install alone won’t fix.
- Spalled and missing mortar joints above the roofline. Years of wet winters on an exterior stack leave the joints open. That’s masonry that needs repointing, not just a cap sitting on top of it.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Kensington, NY
Here’s what this work typically runs in Kensington. A standard multi-flue cap installed runs $350 to $850, depending on flue count and the height of the stack. Cap replacement alone is often $250 to $500. Crown repair, where we rebuild or re-pour to a correct slope, runs $550 to $1,300. A crown coating is the smaller job, usually $250 to $550. On an old Victorian, masonry repairs above the roofline add to that. Nothing is quoted until we’ve seen it, and the written estimate sets the final price.
| Service | Typical Kensington Range |
|---|---|
| Multi-flue cap installation | $350 – $850 |
| Cap replacement | $250 – $500 |
| Crown repair / re-pour | $550 – $1,300 |
| Crown coating | $250 – $550 |
We Also Serve Cities Near Kensington
We work across the neighborhoods around Kensington, and the cap and crown calls nearby look a little different block to block. We also service Flatbush, Borough Park, Midwood and Sunset Park. If you’re just over the line from Kensington, the same team can help.
Serving Kensington, NY – Our Local Coverage Area
We serve Kensington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Kensington
Yes, that pattern points to a failed crown. The flat or cracked top lets water into the brick, and the freeze-thaw cycle spalls the faces and drops mortar. We’d want to see it before quoting a repair. Call (866) 937-8201 for an exact quote – estimates are free.
If your stack has more than one flue opening, yes. The open side flues are the entry point for rain, squirrels and birds. A multi-flue cap covers them all, sized to the actual openings rather than guessed.
More often than a fireplace-only home, because hard burning loads creosote fast. We recommend checking before the season, and a heavier wood-stove user may need it twice. The safest call is to have us look and tell you honestly. Call (866) 937-8201 to book.
Sometimes, but not always. A correctly sized cap helps, while an oversized or wrongly placed one can hurt draft. That’s why we diagnose the flue first and only recommend what the evidence supports.
We check the crown, the flue tiles, the brick above the roofline and creosote levels. You see what we see, so you can decide for yourself whether to repair now or wait. Call (866) 937-8201 for an exact quote – estimates are free.
Book Your Kensington Cap or Crown Visit
If your Kensington chimney has a cracked crown, a missing cap or mortar spalling off the top, it’s worth having us look before winter does more of the work. We’ll inspect, show you the findings, and give you a written estimate. Call (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.