Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Park Slope
If your Park Slope chimney crown is cracked or your cap is missing, rain and meltwater are already finding their way down into the flue. We install and repair caps and crowns on the brownstones and row houses across Park Slope, from the blocks off Flatbush Avenue to the streets near Prospect Park West. Our technicians have up to 11 years of experience, and we work the low-rise rooftops that define this neighborhood every season. Call (866) 937-8201. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Park Slope Homeowners Call Chimney Sweep Sunset Park for Chimney Cap & Crown
Most of the chimneys we see in Park Slope were built between the 1880s and the 1920s, and they were never designed for what’s vented into them today. That history is why we do cap and crown work here differently than a sweep-only outfit would. We diagnose before we quote, and we show you what we found before we recommend a dollar of work. Homeowners who’ve been burned by a low-bid cleaner who painted over a crown and left a failed tile behind call us for exactly that reason.
When you book a chimney cap & crown visit in Park Slope, the technician who inspects is the technician who specifies and installs. The findings don’t get handed to a subcontractor. That matters on these old stacks, where the cap has to fit the flue exactly and the crown has to shed water off brick that’s been rained on for well over a century. We name the brands we install because the materials matter as much as the labor. Our vetted local professionals are licensed and insured as their state requires, and the written estimate sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Park Slope
Cap and crown work is its own category for a reason. A clean flue is the starting point. A safe, structurally sound chimney is the goal. Here’s what we handle across Park Slope.
Cap Installation in Park Slope
A properly sized cap keeps rain, birds and squirrels out of a flue that may never have had protection. On Park Slope brownstones, we measure the actual flue opening rather than guessing, because a cap that sits loose lets water in at the edges. Stainless models from Olympia Chimney hold up through the freeze-thaw winters this neighborhood gets.
Cap Replacement in Park Slope
Plenty of the caps we pull off Park Slope roofs are rusted single-flue models bolted on decades ago, undersized for the stack they’re guarding. We replace them with the right size and the right material for the flue count and the appliance. If the old cap was hiding a cracked tile, you see the camera footage before we touch the flue.
Crown Repair in Park Slope
Original soft-mortar crowns on these 1890s – 1910s rows crack and spall through freeze-thaw, channeling water into the smoke chamber instead of shedding it. A crown repair rebuilds the slope and the overhang so water leaves the chimney the way it should. We don’t recoat a crown until we’ve documented the flue condition underneath it.
Crown Coating in Park Slope
Where the crown is sound but pitted, a flexible coating from Copperfield seals the surface and buys the structure years before rebuild is needed. Coating is a maintenance step, not a fix for a crown that’s already failing; we’ll tell you which one you have. Either way, the goal is keeping meltwater out of a smoke chamber that was parged long before you owned the house.
Trusted Brands We Service in Park Slope
We source and install professional-grade products from DuraFlex, Olympia Chimney, Copperfield and Famco because the parts you can’t see on a rooftop matter most. Flexible liners from DuraFlex fit the tight clay-tile runs common in Park Slope’s older homes. Caps and crown materials from Olympia Chimney and Copperfield are built for the moisture and temperature swings this neighborhood sees every winter. From the firebox to the crown, everything gets handled in one visit, and we’re authorized to source and install these brands from the same supply channels restoration contractors use. Ask us which product suits your chimney and we’ll explain why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Park Slope Homes
- Soft original crowns that crack and spall. The thin mortar wash laid over common brick on these rows fails through freeze-thaw, and the crack lets meltwater straight into the smoke chamber. By the time you notice a stain on the firebox, the water’s been running for a season or more.
- Missing or undersized caps on shared party-wall stacks. Rain and animals get into clay-tile flues that were never lined for a modern insert or appliance. A cap that’s one size too small leaves the outer tile exposed to every storm.
- New-looking tops over unaddressed flues. A crown gets recoated or a cap gets bolted on without camera evidence of the flue condition underneath. A cracked tile or a first-degree creosote load goes unaddressed behind a fresh exterior.
- Inserts and appliances vented into stacks never designed for them. Later renovations added inserts or capped flues without updating the linings. The cap and crown may be fine while the flue itself is undersized for what’s now going up it.
Here’s the part that throws people in Park Slope. Chimney stacks are frequently shared across party walls in the attached brownstone and Romanesque rows. That means a cracked flue tile or a cap failing on one house can visibly change the draft, and the water staining, inside the neighbor’s firebox next door. Technicians here learn to check party-wall chimneys from the roof as well as from the firebox, because what looks like your problem sometimes starts one address over.
On a typical Park Slope job, the original crown is a thin, soft-mortar wash over common brick, and after enough winters it hairline-cracks. A qualified local technician hand-scrapes rather than rotary-sweeps the soft original brick, runs a camera up the clay-tile or unlined flue to document spalling and mortar loss, checks the party-wall stack from the roof, then proposes an exterior crown repair or coating plus a correctly sized multi-flue or custom cap. You see the footage before anyone quotes a repair.

Multi-Flue and Custom Caps for Park Slope Stacks
Many Park Slope roofs have a single stack serving fireplaces on several floors, which means one cap has to cover multiple flue tiles at once. A multi-flue cap from Olympia Chimney covers the whole stack with proper clearance, and a custom cap fits the odd brick dimensions you find on 1880s – 1920s rows where nothing is standard. We measure on the roof and build to the actual stack.
Pricing for Chimney Cap & Crown in Park Slope, NY
Pricing for chimney cap and crown work in Park Slope runs by job, and the written estimate sets the final price. Typical ranges we quote here:
- Single-flue cap installation in Park Slope: roughly $250 – $475
- Multi-flue cap on a shared stack: roughly $475 – $900
- Crown repair on a brownstone: roughly $550 – $1,200
- Crown coating: roughly $350 – $650
- Custom cap on a non-standard stack: quote after measurement
What moves the number is the flue count, the condition of the brick the cap mounts to, and whether the crown needs a repair or only a coating. Free estimates, and nothing gets recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Park Slope
We work across the neighborhoods around Park Slope, including Prospect Heights, Carroll Gardens, Red Hook and Clinton Hill. The brownstone rows run similar construction and similar chimney problems, so the same careful approach to caps and crowns carries over. If you’re just outside Park Slope, call and we’ll confirm we cover your block.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Park Slope
Yes, you can cap an unlined clay-tile flue, and you should, but a cap alone doesn’t fix a flue that was never lined for what’s venting into it today. A cap stops rain and animals at the top; it does nothing for a cracked tile or mortar loss lower down. We run a camera first so you know what’s behind the cap before it goes on. Call (866) 937-8201 for a free estimate.
Because the stacks are shared across party walls in these attached rows, so a cracked flue tile or a failing cap on one side can change the pressure and the draft on the other. It’s not unusual to see water staining in one firebox trace back to a crown failure next door. We check the party-wall stack from the roof as well as the firebox. Call (866) 937-8201 to book an inspection.
You know because you see the camera footage and the crown condition yourself before anything is quoted. We document spalling, hairline cracks and mortar loss with photos, and we’ll tell you plainly when a coating will do the job and when a rebuild is warranted. Nothing is recommended without evidence you can review. Call (866) 937-8201 for a free estimate.
Yes. A season without fires doesn’t stop freeze-thaw from cracking a crown or a cap from rusting through, and the heating runs roughly October through April here, so fall is the peak inspection window before creosote buildup from the coming season becomes a hazard. An annual inspection catches crown and cap failures early, while they’re still cheap to fix. Call (866) 937-8201.
A single-flue cap covers one flue tile, while a multi-flue cap covers the whole stack, which is what most Park Slope brownstones need since one stack often serves fireplaces on several floors. The multi-flue model gives proper clearance over every tile and protects the ones a single cap leaves exposed. We measure the stack on the roof to size it right. Call (866) 937-8201 for a free estimate.
If your Park Slope chimney needs a cap, a crown repair or just an honest look at what’s up there, call us. We diagnose before we quote, show you the camera evidence, and install caps and crowns from brands built to last through these winters. Call (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.