Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Red Hook
If a nor’easter just pushed water through your chimney and left a stain on the ceiling, you’re not the only Red Hook homeowner dealing with it this season. We know this neighborhood’s housing stock well, from the brick rowhouses near the waterfront to the converted warehouses where original chimneys were capped long ago and never properly relined. That matters, because a repair that works on a suburban colonial is often the wrong fix here. Call (866) 937-8201. We answer 24/7.

Why Red Hook Homeowners Call Chimney Sweep Sunset Park for Chimney Repair
Red Hook sits on the harbor, and its chimneys take the weather head-on. Salt-laden damp air eats away at mortar crowns on exposed rooftops, and freeze-thaw winters crack brick that looked fine a few seasons back. When you call us, you’re calling a team whose technicians have up to 11 years of experience working on this kind of masonry, not a cleaner who stops at the flue brush.
What we hear most from Red Hook customers is that a previous sweep couldn’t diagnose the real problem. They got a cleaning, then another, and the ceiling kept staining. We do repair work as well as sweeping, so when an inspection turns up a cracked crown, loose flashing, or an unlined flue, the same team can fix it. Our local reputation in Red Hook rests on that: we identify the cause before we quote, and the written estimate sets the final price. Nothing gets added after the fact. That’s especially true on these older buildings, where the fix you need is often structural, not cosmetic.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Red Hook
The work we do in Red Hook leans toward the structural side. Storm exposure around the harbor drives water into every weak point on a chimney, and these buildings have plenty of them. Here’s what our chimney repair team handles most often in Red Hook.
Mortar Repointing
Freeze-thaw cycles and salty harbor air work away at the mortar joints between bricks, and once the joints recede, water gets behind the brick face. Repointing means grinding out the failed mortar and packing in fresh, correctly matched mix so the wall sheds water again. On Red Hook rowhouses, we find this particularly at the crown and the upper courses, where exposure is worst.
Spalling Brick Repair
Spalling is when the face of a brick pops and flakes off, usually after years of moisture soaking in and freezing. We cut out the damaged brick and replace it with matching units, then repoint the surrounding joints. Catching it early in a Red Hook chimney saves both the brick and the wall behind it.
Chimney Waterproofing
A breathable waterproof coating on the masonry stops liquid water from soaking in while letting interior moisture escape. On these coastal buildings, waterproofing is one of the highest-value services because it slows the salt-driven decay that makes everything else worse. We apply it after any repointing or brick work is done, so the repair is protected, not covered over.
Flashing Repair
Flashing is the metal that seals the joint where the chimney meets the roof. When it pulls loose or corrodes, storm rain driven sideways gets in and shows up as a ceiling stain near the chimney breast. We replace or reset the flashing with new counterflashing and make sure the whole roof joint is watertight again.
Many Red Hook buildings have been through a lot, and the chimney failures here tend to be nested, one problem hiding another. We diagnose before we quote, so you’re not paying for a fix that won’t hold.
Trusted Brands We Service in Red Hook
We install professional-grade chimney materials, and we name the brands because the materials matter as much as the labor. For liners and flashing components, that means DuraFlex and Olympia Chimney. For crown and masonry repair, Gelco products are part of how we rebuild a crown so it lasts. You won’t get hardware-store generics put on a Red Hook chimney that has to survive the harbor climate. The right part, correctly fitted, is what keeps a storm repair from turning into a repeat call next winter. Professional-grade parts. Neighborhood-level service.

Common Chimney Repair Problems We See in Red Hook Homes
This is not a generic list. Red Hook’s building history creates problems you won’t see in the same way elsewhere in Brooklyn.
- Cracked crowns and spalling brick: Salt-laden harbor air and freeze-thaw winters break down mortar and brick faces, letting water straight into the flue. Left alone, a hairline crack becomes a rebuild.
- Flashing failures after nor’easters: Wind-driven rain gets behind flashing that’s pulled loose at the roof line. It shows up as a ceiling stain near the chimney breast, not at the roof.
- Post-Sandy venting mismatches: Many Red Hook buildings were gutted and rebuilt after the storm, and the rebuild left gas boilers and water heaters vented into old coal-flue chimneys with no liner, or an orphaned appliance left on an oversized flue. That’s a backdraft and carbon monoxide risk a repair tech catches on inspection, not during cleaning. It’s more common here than in neighboring Brooklyn neighborhoods because so many buildings were rebuilt.
- Dead or abandoned flues: The waterfront’s warehouse conversions often have chimneys that were capped or sealed years ago and never documented. Sorting out what’s still live and what’s dead is half the job before any sweeping starts.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Red Hook, NY
You deserve real numbers before you book. These are typical Red Hook ranges, and the written estimate sets the final price.
- Mortar repointing: typically $350 to $1,100 depending on how much of the chimney face is involved
- Spalling brick repair: typically $400 to $1,200
- Chimney waterproofing: typically $250 to $600
- Flashing repair or replacement: typically $300 to $850
- Full chimney rebuild, when the damage goes deeper: typically $2,500 to $7,000
Cost rises with height, access, and how much hidden damage turns up once the masonry is opened. Estimates are free, and nothing is recommended without evidence you can see on the camera inspection and in the photo report. If a repair can safely wait until spring, we’ll tell you.
We Also Serve Cities Near Red Hook
We work across this part of Brooklyn, and the storm exposure that hits Red Hook reaches the neighborhoods around it too. If you’re in Carroll Gardens, Park Slope, Brooklyn Heights, or Clinton Hill, the same repair team can help. We serve Red Hook and these neighboring communities with the same diagnosis-first approach.
Serving Red Hook, NY – Our Local Coverage Area
We serve Red Hook and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Red Hook
Because this neighborhood takes nor’easters head-on off the harbor, and wind-driven rain finds every gap where the flashing meets the roof. Flashing that’s merely loose or lightly corroded on a sheltered building can fail outright on an exposed Red Hook rooftop. Once it pulls free, water runs down the chimney breast and shows up as a ceiling stain. Call (866) 937-8201 for a free estimate, and we’ll check the flashing before anything else.
It’s usually the flashing, though both can cause it and only an inspection tells you for sure. A cracked crown lets water into the flue from the top, while failed flashing lets it in at the roof joint; the resulting stain near the chimney breast can look identical. We inspect from the roof and inside, photograph what we find, and show you which one is the culprit. Call (866) 937-8201 – estimates are free.
You can’t tell by looking, which is exactly why it needs an inspection. After the storm, many Red Hook buildings were gutted and rebuilt, and the rebuild often left a gas boiler or water heater vented into an old coal-flue chimney with no liner, or an orphaned appliance on a flue that’s far too big for it. That creates backdraft and carbon monoxide risk. A camera inspection confirms it and documents it with photos. Call (866) 937-8201 to book one.
Repointing replaces failed mortar with fresh mortar matched to the brick; tuckpointing adds a contrasting finish for a more uniform look. For most Red Hook chimneys fighting salt air and freeze-thaw, repointing is what stops water intrusion. Tuckpointing can make the finished face look cleaner where appearance matters. We’ll tell you which your chimney actually needs. Call (866) 937-8201 for a free estimate.
No, not effectively, and the wrong coating can make it worse. Spalling starts with water already inside the brick, and sealing the surface with a non-breathable product traps that moisture and accelerates the damage. Proper waterproofing follows the repair of the failed mortar and brick, and it has to breathe. We diagnose first, then waterproof. Call (866) 937-8201.
Book Chimney Repair in Red Hook Before the First Fire
The best time to fix a storm-damaged crown or loose flashing is before the cold sets in and you light the first fire of the season. If you’ve seen a ceiling stain, crumbling mortar, or you’re unsure what a post-Sandy renovation left behind, let us take a look. We diagnose before we quote, the camera inspection and photo report are included, and the written estimate sets your price. Call (866) 937-8201. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.