Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Borough Park, NY
Chimney Sweep Sunset Park provides independent Gelco service across Borough Park, from multi-flue cap replacement to Level 2 inspection on shared boiler stacks. What makes our Gelco work here different is the flue itself: much of Borough Park’s housing stock vents gas-fired boilers and water heaters through coal-era brick chimneys, so the equipment has to handle acidic condensate and tight shared stacks, not wood smoke. We diagnose the cap, the damper and the liner together before we quote a repair. Call (866) 937-8201. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Borough Park Residents Choose Us for Gelco Service
We’re an independent Gelco service provider, not manufacturer-affiliated and not authorized by Gelco. That distinction matters less than what it lets us do: source genuine Gelco replacement parts when they’re available, use high-quality aftermarket equivalents when OEM parts are discontinued or overpriced, and recommend a compatible replacement cap or damper when repair stops being safe.
Our technicians have up to 11 years of experience, and we’ve handled enough Gelco caps, dampers and liners in Borough Park to recognize the failures that show up on early-1900s brick chimneys before we climb the roof. Scheduling runs through our service line: we answer 24/7, and a booked visit goes out with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Borough Park
Most Gelco calls in Borough Park aren’t about creosote. They’re about draft, condensate and corrosion in flues that were built for coal.
- Corroded multi-flue caps on shared stacks. A Gelco multi-flue cap sitting over a boiler and water heater on the same coal-era flue often shows corroded screens or loose mounting. In Borough Park’s tightly packed rowhouses, that lets rain and debris into a flue that already has marginal draft, and it can push exhaust back toward the basement rather than up the stack.
- Seized dampers in fireplaces turned decorative. A Gelco damper installed in an older fireplace can seize or fail to seal once soot and moisture collect around it. The result is heat loss in winter and backdrafts that read like carbon monoxide complaints even when nothing is burning.
- Stainless liner joints failing at the top plate. High-efficiency boilers produce acidic condensate, and a Gelco stainless liner in an unlined brick flue can develop joint separation or corrosion where it meets the top plate. Shaded north-facing walls and flues along shared party walls hold moisture longer, which speeds the process.
- Animal guards packed with nesting material. Gelco caps fitted with animal guards clog with nest material and soot, especially where buildings sit close together and rooflines overlap. Exhaust backs up, and a flue that ran clean in October can reverse draft by January.
- Multiple appliances on one flue. When a boiler and a water heater share a single original coal flue, any restriction at the cap compounds. We check the cap, the flue interior and the appliance connections as one system instead of brushing the flue and leaving.
Gelco Service in Borough Park: What Local Conditions Mean for Your Equipment
Across Borough Park’s 11219 blocks, it’s common to find an early-1900s brick building where one original coal flue was later tapped for both a boiler and a water heater. That shared stack is the setup behind most of the backdrafting and carbon monoxide complaints we’re called about, and a Gelco multi-flue cap makes it more sensitive, not less – if the cap’s mounting isn’t sealed properly or its screens are blocked, exhaust can spill back into living spaces on the floors above. Boilers run hard from November through March, so the exposure is months long, not a one-off. The dense masonry also holds moisture, and flues on the shaded north side and along party walls are where spalling brick and deteriorated mortar show up first, usually as draft problems rather than creosote. On a Gelco-capped chimney, that means the cap and the flue have to be assessed together before anyone calls the job a cleaning.
Gelco Models & Products We Service in Borough Park
We work on the Gelco chimney products that actually sit on Borough Park roofs: Gelco Multi-Flue Caps, Gelco Custom Caps, Gelco Stainless Steel Liners and Gelco Damper Assemblies. Each one has different repair limits, and we treat them that way.
A cap with a bent screen and sound mounting is a repair. A cap with corroded metal through the body is a replacement with a properly sized, vented unit. A damper that sticks but still seals can often be cleaned and adjusted; one that no longer seats is a safety issue. Liners get inspected at the joints and top plate, because that’s where condensate does its damage first.
As an independent shop, we’re not factory reps for any brand, and we say plainly when a repair is the cheaper right answer.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Borough Park
Gelco chimney service in Borough Park is priced per job from a written estimate. A standard sweep and Level 1 inspection typically runs $150 to $300. A Level 2 inspection, which covers the flue interior and is what shared-flue and real-estate situations usually call for, typically runs $250 to $500. Cap replacement typically falls between $200 and $550 depending on size and whether it’s custom-fitted, and gelco damper work typically runs $150 to $400.
- Sweep and Level 1 inspection: typically $150 to $300
- Level 2 inspection: typically $250 to $500
- Cap removal, cleaning and replacement: typically $200 to $550
- Damper repair or replacement: typically $150 to $400
What drives cost is access to the roof, the number of flues on the stack, and whether corrosion has reached the mounting. The free estimate includes a look at the cap, the damper and the visible flue, and we tell you when a repair can safely wait. Call (866) 937-8201 for an exact figure.
Serving Borough Park, NY – Our Local Coverage Area
We serve Borough Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Borough Park
Because a shared flue with a poorly sealed or blocked cap can spill exhaust back into the building instead of venting it. When a boiler and water heater share one coal-era flue, the stack has very little margin, and a corroded cap mounting or clogged screen removes what margin is left. Treat an active alarm as a call to your gas utility first, then get the flue and cap inspected before the appliances run again. Call (866) 937-8201 for a Level 2 inspection.
If the draft complaint persists after a cleaning, the cap is the next suspect. Loose mounting, corroded screens and debris packed behind an animal guard all restrict flow, and soot alone rarely reverses draft on a stack that was venting fine the season before. A Level 2 inspection shows whether the restriction is at the cap or deeper in the flue.
Often it can be repaired. If the damper blade still seats and the frame isn’t warped, soot and moisture buildup can usually be cleared and the assembly adjusted. Once the blade no longer seals, replacement is the honest answer, because a damper that leaks costs you heat and can mimic a CO problem. We check before we quote either way.
Because a coal flue was never designed for the acidic condensate a modern gas boiler produces. That condensate attacks the liner at the joints and the top plate, and shaded north-facing walls and flues along party walls stay damp longer, so the damage shows up there first. A liner that’s separating at the joints needs replacement, not another cleaning.
A Level 1 inspection covers what’s visible without special access; a Level 2 adds a camera look at the flue interior and is what shared-flue and real-estate situations typically require. For a Gelco-capped boiler stack in Borough Park, Level 2 is usually the right call. Call (866) 937-8201 – estimates are free.
Service Areas Near Borough Park
We also cover Sunset Park and Kensington, plus Bay Ridge, Dyker Heights and Carroll Gardens. Roofs on these blocks share the same coal-era flue construction, so the Gelco cap and damper work carries over. See our Sunset Park and Kensington pages for the local detail, or read more about Gelco and our Borough Park service.
Book Your Gelco Service in Borough Park Today
A typical call is a two-family brick rowhouse where the boiler and water heater share a coal-era flue under a Gelco multi-flue cap, and the cap has corroded or clogged enough to spill exhaust into the basement. A qualified local pro removes and cleans the cap, checks the flue for spalling brick or bad mortar, and refits a properly sized, vented model. Call (866) 937-8201 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.