Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Sunset Park Homeowners
The cap and crown are the two components that decide whether the rest of your chimney survives the next stretch of weather. A cracked crown lets meltwater and rain into the masonry, where it freezes, expands, and spalls the brick from the inside. A missing or loose cap lets birds and squirrels nest in the flue and lets rainwater run straight down onto the damper. Our technicians have up to 11 years of experience diagnosing exactly this kind of damage, and we carry professional-grade materials from brands like Gelco and Copperfield so the fix holds. We diagnose before we quote, so nothing gets added after we’re already on the roof. Call (866) 937-8201 and we’ll book a visit. We answer 24/7, with fast dispatch from 7am to 7pm. Same-day repair is often possible in Sunset Park.
What Our Chimney Cap & Crown Service Includes
Every one of these jobs starts with a look at the whole top of the chimney, not just the broken piece in front of us. A crown that’s failing usually means water has already found a path into the masonry below it, and a cap that’s gone missing usually means something got into the flue. We check both before we write anything down.
Cap Installation
A chimney cap is the lid that sits over the flue opening, and a proper one does three jobs at once: it keeps rain out, keeps animals out, and gives sparks a place to break up before they hit the roof. You need one if your flue is open at the top, which is common on older Sunset Park rowhouses where the original cap rusted away years ago. We install single-flue and multi-flue caps sized to your actual flue dimensions, with stainless mesh that holds up to weather instead of the thin galvanized screening that rusts through in a couple of seasons.

Cap Replacement
Replacement is for a cap that’s still there but no longer doing its job: rusted through at the seams, mesh torn open by a raccoon, or a leg bent out of shape in a storm. A damaged cap is worse than a missing one in some ways, because it still looks like protection while letting water and animals straight through. We pull the old cap, check the flue tile and crown underneath for damage the failing cap may have allowed, and set a new cap anchored into sound masonry rather than into the loose mortar that caused the original to come free.

Crown Repair
The crown is the sloped concrete or mortar surface at the very top of the chimney, and its whole purpose is to shed water away from the brick below. When it cracks, hairline or wider, water gets into the masonry, freezes, and pushes the crack open further over the winter. We remove the failed sections, rebuild the slope so it drains properly, and bond the new material to sound masonry. A crown that has pulled away from the flue entirely gets rebuilt rather than patched, because mortar smeared over a gap that size won’t last a season.

Crown Coating
Coating is the right call when the crown is sound but the surface has started to craze, with fine cracking across the top rather than one deep break. A flexible, weather-resistant coating seals those hairline cracks and gives the concrete a few more years before it needs full replacement. We apply it to a cleaned, prepared surface so it actually bonds; coating over dirt or loose material is just expensive paint. If the crown has structural movement in it, we’ll tell you plainly that coating won’t help and the crown needs repair instead.
Multi-Flue Cap
Many Sunset Park homes have two or three flues side by side, one for the fireplace, one for the heating appliance, sometimes one for a boiler that’s since been abandoned. A multi-flue cap covers all of them under a single stainless housing, which is cleaner, sturdier in wind, and easier to keep animal-free than three separate caps fighting for space. We measure each flue tile individually because they’re rarely perfectly aligned or the same size, and we build the cap to the widest configuration so nothing binds or sits crooked. The housing is anchored to the crown, not to the flue tiles, so it doesn’t stress the tile joints.
Custom Cap
Oversized flues, unusual crowns, chimney tops that step down a slope, and historic rooflines sometimes can’t take a stock cap without looking wrong or fitting badly. A custom cap is fabricated to the exact footprint of your chimney so the proportions match the house and the anchorage is solid. This is where material quality shows up: we work with Copperfield copper caps that age into a finish most homeowners actually prefer to bare stainless, and we specify the mesh, frame and mounting for the wind and weather your roofline sees. If you want the top of the chimney to look intentional rather than improvised, this is the route.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We name the brands we install because the materials matter as much as the labor. A cap isn’t a complicated object, which is exactly why the difference between a good one and a bad one comes down to gauge of steel, quality of the weld, and whether the mesh is stainless or not. Gelco crown materials give us a repair compound that moves with the masonry instead of cracking away from it, which is what happens when a crown gets patched with ordinary mortar. Copperfield copper caps bring a level of finish and durability that stamped stainless can’t match, and we specify them when a homeowner wants the cap to last and look right on a visible roofline.
For the flue side of the job, DuraFlex and Olympia Chimney components let us tie a cap replacement to a liner issue when the two are connected, which happens more often than people expect. If water got past a missing cap and damaged the top of the liner, we can address both in the same visit rather than sending you to a second contractor. Whether you have Gelco or Copperfield at the top of your stack, DuraFlex or Olympia Chimney inside it, or any other make, we can help. We diagnose first and quote after, and the materials we bring up the ladder are the professional-grade ones, not hardware-store generics.
Signs You Need Chimney Cap & Crown Right Now
- Water staining on the chimney breast or ceiling near it. Brown streaks on interior masonry or a damp patch on the ceiling usually means water is getting past the crown or down an uncapped flue. By the time it shows inside, the masonry has been wet through at least one freeze cycle, so it’s worth checking soon rather than waiting for spring.
- Crumbling mortar or flaking brick at the top of the chimney. Spalling brick and sandy mortar joints near the crown are the classic sign that water has been soaking in and freezing. The damage moves downward over time, and the earlier the crown gets addressed the less masonry needs repair.
- A cap that’s visibly rusted, bent, or missing mesh. Rust-through at the seams or torn screening means the cap has stopped keeping animals and rain out. Replacing it before nesting season is cheaper than clearing a flue afterward.
- Birds, squirrels, or nests in the firebox. An animal in the flue is a strong sign the cap has failed or was never installed. It’s a fire hazard if the nest stays and a carbon monoxide risk if the flue is blocked, so this one is worth acting on without delay.
- A visible crack running across the crown. Any crack wide enough to see from the ground lets water straight into the masonry below. A crown repair now is a fraction of the cost of rebuilding a chimney top later.
Our Chimney Cap & Crown Process – Step by Step
- 1
Inspection from the roof and, where needed, from inside. We look at the crown, the flue tiles, the cap and the flashing as a system, not as isolated parts. Where a camera inspection helps, we run one, and you see the photos before we recommend anything.
- 2
A written diagnosis with the reasoning. We tell you what’s actually failing and why, and we name the materials we’d use, whether that’s a Gelco crown repair, a Copperfield copper cap, or a stainless multi-flue housing. You get a written estimate that sets the final price, so nothing moves after the fact.
- 3
Removal of the failed component. Old caps come off with their anchors, and failed crown sections get cut back to sound masonry. We don’t coat or cap over material that’s already loose, because the new work won’t bond and you’d be paying twice.
- 4
Rebuild or install to spec. Crowns get rebuilt with a proper slope so water runs off and away from the flue. Caps get sized to the flue, anchored into the crown, and set with stainless mesh that won’t rust out. If a liner is compromised underneath, we address it in the same job rather than leaving it as a follow-up.
- 5
A final check with photos. Before we come down, we photograph the finished crown and cap and confirm the flue is drawing properly. You get those photos with the report, which also doubles as documentation if you’re buying or selling a home.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Sunset Park?
Most chimney cap and crown work in Sunset Park runs between a few hundred and a couple of thousand dollars, and the range is wide because the jobs are genuinely different. A straightforward single-flue cap installation typically runs in the low hundreds. A full crown rebuild on a rowhouse chimney runs higher, and a custom copper cap or a multi-flue housing sits at the top of the range because of the fabrication involved. The written estimate sets the final price and the estimate is free, so you know the number before any work is booked.
| Job | Typical estimated range |
|---|---|
| Single-flue cap installation | $180 – $450 |
| Cap replacement (existing cap removed) | $250 – $550 |
| Crown repair (partial rebuild) | $350 – $850 |
| Crown coating (sound crown, sealed surface) | $200 – $500 |
| Multi-flue cap | $450 – $1,100 |
| Custom copper cap (Copperfield) | $700 – $1,800 |
What affects the price is mostly access and height. A chimney on a steep ridge or a tall rowhouse takes longer to work on safely than one you can reach from a low porch roof. The size and shape of the flue and crown matter, and so does how much failed material has to come off before sound masonry is reached. You avoid overpaying by getting the inspection first and asking exactly what’s failing and why, rather than accepting a quote for the whole top of the chimney. Our free estimate includes the roof inspection, the written recommendation, and the price for the job we’re describing, and nothing is recommended that the camera evidence doesn’t support.
Chimney Cap & Crown Near Sunset Park – Our Service Area
We cover Sunset Park and the neighborhoods around it, including Borough Park, Kensington, Bay Ridge, Dyker Heights, Carroll Gardens, Red Hook, Park Slope, Flatbush, Bensonhurst, Midwood, and Prospect Heights. Dispatch runs Sunday through Friday from 7am to 7pm, so a visit can usually be booked within that window. If you’re in Brooklyn and need the same chimney cap & crown service one neighborhood over, it’s the same crew and the same written estimate process. See the full range on our Chimney Sweep Sunset Park page, or look at chimney cap & crown work we do nearby.
Serving Sunset Park, NY – Our Local Coverage Area
We serve Sunset Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Sunset Park
Chimney cap and crown service covers the two protective components at the very top of your chimney. The crown is the sloped concrete or mortar surface that sheds water away from the masonry below it. The cap is the lid over the flue opening that keeps rain, animals, and sparks out. We repair or replace both, and we check the flue underneath so a water problem doesn’t get capped over.
Most cap installations are done in a couple of hours. A crown rebuild takes longer, usually a full visit or more, because the failed sections have to be cut back and the new surface has to be built with a proper slope. If the crown needs to cure before the cap goes on, we’ll tell you upfront and book the follow-up. The written estimate includes the expected time.
A single-flue cap installation typically runs in the low hundreds, crown repair runs higher depending on how much has to be rebuilt, and a custom copper or multi-flue cap sits at the top of the range. The written estimate sets the final price, and the estimate itself is free. Call (866) 937-8201 for an exact quote on your chimney.
Yes. We work with Gelco crown repair materials and Copperfield copper caps, along with DuraFlex and Olympia Chimney components inside the flue. We install these because they’re the materials that hold up, not because we’re tied to a single product line. If you have a different brand on your chimney, we can help with that too.
Same-day repair is often possible in Sunset Park, and we book visits Sunday through Friday from 7am to 7pm. We answer the phone 24/7, so a call lands with us whenever you make it. If you call outside dispatch hours, a technician gets scheduled into the next opening.
Our workmanship on cap and crown installation is backed by a satisfaction guarantee. If something we installed or repaired fails, call and we’ll come out. We stand behind the materials we specify and the work we do, and the written estimate spells out what’s covered. Call (866) 937-8201 if you’ve got a question on a prior job.
You don’t need to do much. Clear access to the fireplace and to the roof is helpful, and if you have prior inspection reports or photos, have them ready. If a fireplace has been unused, let us know so we can check the flue for blockages. For a real-estate transaction, tell us the inspection deadline so we can document the findings properly.
Schedule Your Chimney Cap & Crown Service in Sunset Park Today
If the top of your chimney is cracked, uncapped, or capped with something that’s rusted through, we’ll inspect it, show you the evidence, and give you a written estimate that sets the final price. The estimate is free and there’s no obligation. Call (866) 937-8201 to book. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. From the cap to the crown, we handle the whole job, and we’ll tell you when a repair can safely wait.
Written by the team at Chimney Sweep Sunset Park.