Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Bensonhurst?
Chimney cleaning in Bensonhurst typically costs $150 to $290 for a standard single-flue sweep, and $320 to $475 when the job includes a Level 2 inspection, a stubborn creosote load, or access trouble on an older brick-and-mortar chimney. Most Bensonhurst homes we see fall in the first range. The written estimate you get before any work starts is what sets the final price, and it’s free.
We’re chimney sweep sunset park, and we handle the full chimney system, not just the brush-and-vacuum part. That matters here because a lot of Bensonhurst chimneys are attached to houses built between the 1920s and the 1960s, where a clean flue often reveals cracked mortar crowns, deteriorated liner tiles, or a cap that’s been missing for years. A sweep-only crew cleans the flue and leaves. We clean it, then tell you what the inspection found and fix it in the same visit.
Call (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A standard chimney sweep in Bensonhurst runs $150-$290.
- Sweep plus Level 2 inspection: $320-$475.
- Creosote removal above the routine stage, animal nests, and rooftop access issues push cost up.
- Chimney cap installation is $185-$410 and is the single most useful preventive spend in this neighborhood.
- Our technicians have up to 11 years of experience, and we install DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield materials.
Chimney Cleaning Cost Breakdown (2026)
Here’s what chimney work typically costs in Bensonhurst this year. These are estimated ranges for the local market, not a quote for your house. The written estimate after we look at your flue sets the real number.
| Service | Typical Range (Bensonhurst, 2026) |
|---|---|
| Standard chimney sweep (one flue, routine soot and light creosote) | $150 – $290 |
| Sweep with Level 2 camera inspection | $320 – $475 |
| Second flue sweep (same visit) | $80 – $150 |
| Heavy creosote removal (glazed, stage 3) | $400 – $700 |
| Animal nest or debris removal from flue | $200 – $450 |
| Chimney cap installation (Famco, Olympia Chimney, Copperfield) | $185 – $410 |
| Crown repair or rebuild | $350 – $1,100 |
| HeatShield flue resurfacing (per flue) | $1,200 – $2,600 |
| DuraFlex liner replacement (per flue) | $2,400 – $5,200 |
| Fireplace repair (damper, firebox, smoke chamber) | $300 – $900 |
| Level 2 inspection for a home sale or purchase | $275 – $425 |
The biggest swing is whether your flue needs a cleaning or a repair. A routine sweep on a chimney that’s been maintained is quick work. A chimney that’s been burning unseasoned wood for a decade, or one that’s sat unused through several winters while sparrows and squirrels moved in, takes longer and costs more. Glazed creosote is the rough one: it bonds to the tile like tar, and a standard brush doesn’t touch it. That’s where HeatShield comes in, because resurfacing a compromised liner is a diagnostic-level repair rather than a cleaning task. Most sweep-only operations can’t offer it. We can, and it costs far less than tearing out and replacing a liner that’s still structurally sound underneath the glazed layer.
The other variable is access. A chimney on a flat or low-slope roof is straightforward. A tall chimney on a steep pitch behind a parapet takes more setup and more safety gear, and that’s reflected in the estimate.
What Affects Chimney Cleaning Pricing in Bensonhurst
Bensonhurst is a neighborhood of two- and three-story brick homes, semi-attached rowhouses, and a mix of pre-war and post-war construction. That housing stock shapes what a cleaning job actually involves here.
- Chimney height and roof access. Most Bensonhurst chimneys rise well above a two-story roofline, and many sit close to a neighbor’s wall. That means more ladder work and more careful setup than a suburban ranch house, which nudges the labor portion of the estimate up.
- Age of the flue tiles. In houses built before the 1960s, clay tile liners have often been through decades of heating cycles. A sweep is the moment those cracks become visible. If we find joint gaps or spalling, we quote the repair on the spot rather than sending you to a second contractor.
- Creosote stage. Light soot sweeps out easily. Stage 3 glazed creosote is a different job with a different price. The only reliable way to know which you have is to have the flue looked at.
- Burning habits. Fireplaces used for ambiance a few times a month build creosote slowly. A fireplace used as a primary heat source through the cold months builds it fast. We ask how you burn before we quote, because it changes the scope.
- Blockages. Chimney swifts, squirrels, and starlings nest in uncapped flues across Brooklyn. A blocked flue won’t draft, and removing a nest plus disinfecting the flue adds cost.
- Missing cap or damaged crown. An uncapped chimney takes in rain, which mixes with soot and speeds up liner decay. If the crown is cracked, water gets into the masonry itself. Both are inexpensive to fix compared to the liner damage they cause, which is why we treat cap and crown work as a dedicated service category rather than an upsell.
One local note that surprises people: Bensonhurst sits on the coastal plain of Brooklyn, and the freeze-thaw cycling through winter is hard on masonry crowns and mortar joints. A crown that looks fine in October can be spalling by March. The same weather that makes a sweep worth doing every year also makes the top of the chimney the first part to fail.
What’s Included in a Standard Chimney Cleaning
A proper sweep is more than running a brush down the flue. When we clean a chimney in Bensonhurst, the job includes:
- A visual check of the firebox, damper, smoke chamber, and flue before any cleaning starts
- Drop cloths and a sealed vacuum setup so no soot ends up in your living room
- Brushing the flue with the correct size and type of brush for your liner material
- Removal of soot, creosote, and any debris at the smoke shelf
- A check of the cap, crown, and flashing from the roof
- A written report of what we found and, if repairs are needed, a clear estimate for them
We diagnose before we quote. No surprise add-ons after the truck arrives. If the sweep turns up a cracked crown or a failing liner joint, you’ll see it in the report and hear the price before anyone touches a trowel.
How to Save on Chimney Cleaning
The cheapest chimney cleaning is the one you don’t need to repeat. A few habits keep annual sweeps in the low end of the range:
- Burn dry, seasoned wood. Wet wood produces far more creosote per fire. Seasoned hardwood, split and stacked for a year, burns cleaner and leaves less behind.
- Don’t smolder your fires. Dampers closed too far and fires left to smoke overnight are the fastest way to build glazed creosote. That’s the $400-$700 removal territory instead of the $150-$290 sweep.
- Get a cap on the chimney. A cap keeps rain, birds, and squirrels out. It’s the least expensive preventive measure on the whole chimney system and the one most Bensonhurst chimneys are missing.
- Sweep on a schedule, not on a crisis. Annual cleaning for a regularly used fireplace keeps creosote from ever reaching the glazed stage.
- Ask for a free estimate before agreeing to anything. Ours are free, and the written estimate is what sets the final price. Call (866) 937-8201.
The one thing we’d never suggest you cut is the inspection. A sweep cleans the flue; an inspection tells you whether the flue is safe to use. Those are different jobs, and skipping the second one is how people end up with a liner replacement instead of a sweep.
Does a Chimney Cleaning Include an Inspection?
A basic sweep includes a visual check, but a full Level 2 inspection with a camera is a separate service and adds to the cost, typically bringing a $150-$290 sweep up to $320-$475. If your chimney hasn’t been inspected in years, or you’re buying or selling a home in Bensonhurst, the camera inspection is worth the extra. It’s the only way to see what’s happening behind the flue tiles, and for a real-estate transaction, it’s often what a lender or buyer’s attorney asks for.
We run both under one visit, so you’re not scheduling a sweep with one company and an inspection with another. Same for the repairs the inspection turns up. Professional-grade parts, neighborhood-level service.
Repair or Replace? What the Numbers Say
When a sweep reveals a damaged liner, the question becomes whether to resurface or replace. HeatShield flue resurfacing typically runs $1,200-$2,600 per flue and restores a liner that’s cracked or has gaps at the joints but is otherwise sound. A full DuraFlex liner replacement runs $2,400-$5,200 and is the answer when the original tiles are spalled, misaligned, or missing entirely. Resurfacing is dramatically less expensive, and for the right candidate it’s a permanent fix rather than a stopgap. The inspection is what tells you which category you’re in.
We name the brands we install because the materials matter as much as the labor. DuraFlex handles the metal liner side. HeatShield handles resurfacing. Gelco, Olympia Chimney, Famco, and Copperfield cover the cap, crown, and accessory work. These are the materials commercial and restoration contractors use, not the hardware-store generics. Same team for the diagnosis and the repair, so nothing gets handed off to a subcontractor who’s never seen your chimney.
FAQs – Chimney Cleaning Cost
How much does a chimney cleaning cost in Bensonhurst?
A standard chimney cleaning in Bensonhurst typically costs $150 to $290 for a single flue. Add a Level 2 camera inspection and the job runs $320 to $475. Call (866) 937-8201 for an exact quote; estimates are free.
How often should a chimney be cleaned in Bensonhurst?
Once a year for a fireplace used regularly, which keeps you in the $150-$290 range rather than the higher repair tiers. A chimney used only occasionally can sometimes go longer, but an annual inspection is still the safe baseline. Call (866) 937-8201 to book a sweep.
Is it cheaper to repair a chimney liner or replace it?
Resurfacing with HeatShield typically costs $1,200 to $2,600 per flue, versus $2,400 to $5,200 for a full DuraFlex liner replacement. For a liner that’s cracked but structurally sound, resurfacing is the lower-cost route and a real fix, not a patch. Call (866) 937-8201 for an inspection that tells you which one you need.
Can you clean my chimney the same day?
Yes, same-day chimney cleaning is often possible in Bensonhurst. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 937-8201 and we’ll book you in.
Why is my chimney cleaning more expensive than my neighbor’s?
Creosote stage, flue condition, chimney height, roof access, and whether a cap or crown needs work all move the price. A glazed creosote removal at $400-$700 is a different job from a routine $150-$290 sweep. The written estimate after an inspection is the only reliable number for your chimney; call (866) 937-8201 and we’ll give you one, free.
Why Homeowners in Bensonhurst Call Us
We cover the full chimney lifecycle under one roof: sweeping, inspection, cap and crown work, liner repair with HeatShield and DuraFlex, and fireplace repair. That means when the sweep turns up a problem, the same team that found it fixes it. No referrals out. No second contractor to schedule and explain everything to again. Our technicians have up to 11 years of experience, and we stand behind the work with a satisfaction guarantee.
A clean flue is the starting point. A safe, structurally sound chimney is the goal, whether that means a $150 sweep or a $2,600 resurfacing job. Professional-grade parts, neighborhood-level service.
Call (866) 937-8201 for a free estimate on chimney cleaning in Bensonhurst. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.
Pricing reflects the Bensonhurst market as of 2026. Chimney Sweep Sunset Park offers free estimates – call (866) 937-8201.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Tiana Grant"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Paige Sullivan"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Robert Thompson