Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Midwood, NY
We provide independent Gelco service across Midwood, and the one thing that makes our Gelco work here different is the basement. In this neighborhood, “chimney cleaning” often means checking a gas vent connection in a shared mechanical room before anyone climbs the roof. That order matters, and it’s why we diagnose before we quote. Our technicians have up to 11 years of experience with Gelco caps, dampers and liner components, and we work with quality parts that fit the equipment you already have. Reach us at (866) 937-8201 for a free estimate.
Why Midwood Residents Choose Us for Gelco Service
Most Midwood houses don’t have a simple fireplace flue. They have an exterior brick stack, built between 1920 and 1940, carrying clay tiles that may once have served a coal or oil furnace. When someone has a Gelco cap, a top-sealing damper or a Gelco stainless liner kit on one of those stacks, the work needs a crew that reads the whole system, not just the firebox.
We’re an independent Gelco service provider. We’re not affiliated with or authorized by the manufacturer, and we say that plainly because it shapes how we work: we’re free to tell you when a Gelco part is sound and should stay, and when it has to go. On top of that, we install and service DuraFlex, HeatShield, Olympia Chimney, Famco and Copperfield materials, so a Gelco installation that needs a crown rebuilt or a liner resurfaced doesn’t send you looking for a second contractor. From the firebox to the crown, everything in one visit.
Scheduling is straightforward. Tell us what you’re seeing and we’ll book a sweep. Call (866) 937-8201. We answer 24/7, with fast dispatch from 7am to 7pm.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Midwood
- Cap flanges corroded by freeze-thaw. A Gelco multi-flue cap on a 1930s exterior brick stack takes the weather head-on. Midwood’s cold winters and repeated freeze-thaw cycles pull the mounting flange apart at the seams, and once it opens, water tracks down the flue. We check the flange first and reseat or replace the cap.
- Hardened damper gaskets. Gelco top-sealing dampers seal on a gasket, and humid summers harden it. When it leaks, an orphaned water-heater flue starts pulling downdraft and losing heat. A gasket and seal service usually fixes it.
- Clogged cap screens. Original coal and oil flues leave sooty residue behind, and it collects in Gelco cap mesh until the draft drops off. On a gas appliance that can raise carbon monoxide risk. Cleaning the screen and sweeping the flue goes together.
- Joint separation in Gelco liner kits. A stainless liner kit dropped into an unlined 1930s flue can separate at the joints when the old clay tile spalls and shifts. We inspect the full run and re-secure or replace the liner.
- Multiple terminations on one stack. Shared stacks terminate several flues side by side, so a Gelco cap has to cover each one without cross-drafting. We measure the stack before recommending a cap.
Gelco Service in Midwood: What Local Conditions Mean for Your Equipment
Here’s the local detail that generic chimney pages skip. In Midwood’s two-family houses, the boiler and the water heater often vent into separate flues of the same exterior brick stack, meeting in one shared basement mechanical room. That single fact changes how Gelco cap work goes. A cap has to account for multiple terminations and for the chance that one flue pulls air from the other. Cross-contamination between those flues is a real drafting problem, not a theory, and it shows up first as a smell or a lazy flame downstairs, long before anything looks wrong on the roof.
The winter climate adds to it. Freeze-thaw cycles crack mortar and crown caps on the aging brick, and summer humidity speeds spalling on stacks that face the weather. That’s why we check the basement flue connection before we ever get on the roof. If the appliance connection is wrong, a new cap won’t fix it. A Level 2 inspection tells us which question to answer first.
Gelco Models & Products We Service in Midwood
We service the full range of Gelco chimney components: Gelco Multi-Flue Caps, Gelco Custom Chimney Caps, Gelco Top-Sealing Dampers and Gelco Stainless Steel Liner Kits. Each one ages differently on a Midwood stack, and each one needs a part that fits it, not a hardware-store substitute.
For caps, dampers and liner components, we use OEM Gelco parts whenever they’re available, which preserves fit and the manufacturer’s warranty. For obsolete items, a quality aftermarket equivalent does the job. Our rule is simple: repair when the component is structurally sound, replace when corrosion or spalling compromises safety. Custom caps come measured to the actual stack, including multi-flue terminations. If you want the wider picture of what we handle across these product lines, see our Gelco service page.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Midwood
Every job here starts with a sweep and inspection, and the written estimate sets the final price. Typical ranges for the work we do in Midwood:
| Service | Typical Estimated Range |
|---|---|
| Chimney sweep with basic inspection | $150 – $350 |
| Level 2 inspection (camera, including photo report) | $250 – $500 |
| Gelco cap replacement or reseating | $200 – $550 |
| Top-sealing damper repair or gasket service | $200 – $450 |
| Chimney waterproofing | $300 – $700 |
| Liner assessment and re-securing | $400 – $1,200 |
What drives the number: how many flues are in the stack, whether the cap is stock or custom, and whether the clay tile behind the liner has moved. A free estimate includes the sweep, a camera look at the flue, and photos you keep. Nothing gets recommended that you can’t see for yourself, and we’ll tell you when work can safely wait. Call (866) 937-8201 for an exact quote.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Midwood
Because it’s sitting on an exterior brick stack that takes freeze-thaw cycles all winter. Each thaw drives moisture into the seams, and the flange corrodes from the inside out. A custom Gelco cap with a properly sealed flange and stainless mesh holds up far better than a stock unit bolted to a rough crown. Call (866) 937-8201 for an estimate.
Usually, yes. Sticking is most often a hardened gasket or a seal that’s picked up soot, not a failed body. We clean the seat, replace the gasket and test the seal. If the frame is bent or corroded through, replacement is the honest answer. Call (866) 937-8201 to book a look.
Yes, and it’s the step that protects you. An unlined 1930s flue has clay tile that may have spalled or shifted, and a liner sized without a camera look can separate at the joints once it’s in. A Level 2 inspection with a photo report shows the condition of the full run before anything is installed. Call (866) 937-8201 for an exact quote.
It changes the measurement. Clay tile terminations sit at different heights and spacings on old stacks, and multiple flues in one stack rarely line up evenly. A stock cap covers one pattern. A Gelco custom cap is built to the actual terminations, which is why measuring before ordering matters more here than in newer housing.
Yes, and multi-flue is the normal case on these shared exterior stacks. The cap has to cover each termination and keep the flues from pulling on each other, so we check the basement connections first and then measure the stack. Call (866) 937-8201 to set up a free estimate.
Service Areas Near Midwood
We work on Gelco chimney systems throughout this part of Brooklyn, including Midwood itself. Nearby, we also cover Sunset Park, Borough Park, Bay Ridge, Dyker Heights and Carroll Gardens. For Gelco cap and liner work specifically, our Flatlands and Kensington pages cover the same services in those areas.
Book Your Gelco Service in Midwood Today
Whether your Gelco cap has rusted at the flange or a top-sealing damper won’t hold, we’ll sweep, inspect and show you the camera footage before any work is quoted. Estimates are free, and the written estimate sets the price. Call (866) 937-8201. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.