Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Flatbush
Chimney inspection in Flatbush usually costs $150 – $450 depending on the level of inspection you need, and it’s the one appointment that tells you what your flue can actually do. If you live in Flatbush, that answer matters more than it does in newer neighborhoods. The housing here is old, and a lot of it was built before anyone imagined a gas boiler venting into the same stack as a fireplace. We inspect Flatbush chimneys with a camera, show you the footage, and tell you plainly when a repair can wait. Call (866) 937-8201. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Flatbush Homeowners Call Chimney Sweep Sunset Park for Chimney Inspection
Flatbush is a neighborhood of early-20th-century brick two- and three-story homes and apartment houses, and most of what we find up on those roofs is wear that dates back to the coal era. That’s the work we know best, and it’s why homeowners in Flatbush call us back year after year.
When you book a chimney inspection with us, a technician arrives with a camera, not a sales pitch. We document what the flue looks like inside, show you the footage, and only then talk about repair. No liner or crown work gets recommended without evidence you can see for yourself.
We handle the whole chimney system, so inspection findings get addressed by the same team instead of handed off to a subcontractor. Our technicians have up to 11 years of experience, and they’re used to the specific quirks of Flatbush housing stock. That includes the crumbling mortar crowns and parged smoke chambers that show up on block after block here. When we serve Flatbush, we know what we’re walking into before we get on the roof.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Flatbush
Not every chimney needs the same depth of inspection. We offer four main categories, and we’ll tell you which one fits your situation before we start.
Level 1 Inspection
A Level 1 inspection is the basic visual check, and it’s what most Flatbush homeowners need for an annual maintenance visit. We look at the accessible parts of the chimney, the firebox, the damper, and the flue from the ground or the roofline. If you burn wood regularly and haven’t had any changes to your system, this is usually the starting point.
Level 2 Inspection
A Level 2 inspection goes deeper, using a camera to look inside the flue itself. This is the inspection we recommend for most Flatbush rowhouses, especially older ones where the original coal-fired flue may have been tied to a gas boiler without relining. It’s also the standard inspection for real estate transactions, and we can document findings for a sale or a purchase.
Level 3 Inspection
A Level 3 inspection is for when we suspect a serious problem in a concealed part of the chimney and need to open up access to look. Think of it as the inspection you hope you don’t need. In Flatbush’s older homes, this sometimes comes up when there’s evidence of a cracked clay tile or a damaged smoke chamber that a camera alone can’t fully assess.
Camera Inspection
Camera inspection is the core of what we do in Flatbush, because the flues here are narrow and old, and you can’t judge them from the outside. We run a camera down the flue and show you the feed. Cracked clay tiles, gaps in the mortar joints, and the buildup patterns that tell us how the chimney has been used all show up clearly. The footage is yours to see, and we take photos so you have a record.
Flue Inspection
Calling it a flue inspection makes the point: we’re looking at the flue, not the paint on the chimney stack. A camera inspection of the flue reveals cracked tiles and gaps where creosote can seep into brickwork, and it also tells us whether a boiler and a fireplace are venting into the same stack. That shared-flue condition is a real hazard, and we look for it specifically in Flatbush chimneys.

Trusted Brands We Service in Flatbush
We work with professional-grade product lines because the materials matter as much as the labor. That means Olympia Chimney and DuraFlex components when we source liner materials, and HeatShield when a flue needs resurfacing rather than replacement. Famco and Copperfield caps show up on Flatbush roofs too. We don’t claim to stock parts on a truck; we source what your chimney actually needs and schedule the install. You get one contractor for diagnosis and repair, with professional-grade parts and a turnaround that doesn’t leave a damaged crown open for a season.
Common Chimney Inspection Problems We See in Flatbush Homes
The problems in Flatbush chimneys are different from what you’d find in newer suburban housing. Here’s what comes up most.
- Cracked clay flue tiles from decades of heat cycling. A boiler retrofitted into a coal-era flue heats and cools the tile thousands of times, and eventually it cracks. Creosote then works into the brickwork behind it.
- Single-wythe chimneys spalling at the crown. The soft Brooklyn brick in these original chimneys takes freeze-thaw hard, and mortar joints open up, which lets water and animals in.
- Shared flues between a boiler and a fireplace. This happens when the boiler vent was tied into the fireplace flue without relining. It causes draft problems and creates a real risk of carbon monoxide spillage, and a simple sweep would never catch it.
- Unlined or parged smoke chambers breaking down. Many of these chimneys had a parge coat instead of a proper liner, and decades later that coat is spalling off. HeatShield resurfacing is often the fix, but only after we document the condition on camera.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Inspection in Flatbush, NY
Chimney inspection pricing in Flatbush runs roughly $150 – $250 for a Level 1 visual inspection, $250 – $450 for a Level 2 with camera, and $500 – $900 or more for a Level 3 if access has to be opened up. Camera inspection alone, if you’ve already had a Level 1, typically falls in the $200 – $350 range. What moves the number is the condition of the chimney and the access to it: a chimney on a three-story Flatbush apartment house takes longer than one on a two-family. We quote per job, and the written estimate sets the final price. The inspection itself is where the price of any repair gets decided, and we don’t quote a liner or a crown until the camera has shown us why it’s needed. Estimates are free.
We Also Serve Cities Near Flatbush
Flatbush isn’t the only neighborhood where we work. We also inspect chimneys in Kensington, Flatlands, Crown Heights, and Midwood. Those areas share a lot of the same housing stock and the same coal-era flue problems, so the work is familiar. If you’re just outside Flatbush and aren’t sure whether we cover your block, call and ask. We’ll tell you straight.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Flatbush
Yes, you likely do. The flue tiles are still the flue, and they carry whatever your boiler or water heater is venting, whether or not you light a fire. A camera inspection is what tells you whether those tiles are cracked and whether anything else has been tied into the same stack. Call (866) 937-8201 for an exact quote; estimates are free.
You can’t tell from the outside, which is exactly why a camera inspection matters here. A technician documents the flue from the inside and can see whether two appliances are venting into one stack. In Flatbush, that shared flue often traces back to a boiler retrofit that was never followed by relining. Call us and we’ll show you the footage before anyone recommends a fix.
Third-degree creosote looks like a hard, glazed, shiny coating on the flue wall, and it’s the most stubborn kind. Standard sweeping won’t remove it. It usually calls for chemical treatment or, in badly damaged flues, a liner. A camera inspection in Flatbush is what tells you which stage you’re at. Call (866) 937-8201 and we’ll walk you through what the footage shows.
No, and the climate is the reason. Flatbush’s freeze-thaw cycles work on soft Brooklyn brick all winter, and a crumbling crown lets water in behind the masonry. Flaking brick and open mortar joints are signs that water has already gotten in. It’s worth an inspection before another winter. Estimates are free, so call (866) 937-8201.
That’s a bad idea on an old Flatbush chimney, because sweeping cleans the flue without telling you what shape it’s in. A shared flue or a cracked clay tile won’t show up in a sweep, and those are the conditions we find most often in coal-era housing here. The camera evidence is what protects you from being sold a liner you may not need. Call us and we’ll inspect before we sweep.
Book Your Chimney Inspection in Flatbush
If your Flatbush home still has its original flue, the only way to know what’s going on inside it is to look. We inspect with a camera, show you what we find, and quote repairs only after you’ve seen the evidence. One team handles the finding and the fixing. Call Chimney Sweep Sunset Park at (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.