Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Prospect Heights
If your chimney crown is cracked or your cap is missing, the fix in Prospect Heights usually runs $375 to $1,450 depending on whether we’re coating, rebuilding, or fitting a custom cap to an original 1880s stack. We work on the tall brick chimneys that line these blocks, and we know the difference between a cap that seats properly and one that just looks like it does. Most of our cap and crown work here starts with a camera inspection, because on these buildings the flue behind the crown is rarely simple. Call (866) 937-8201. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Prospect Heights Homeowners Call Chimney Sweep Sunset Park for Chimney Cap & Crown
Prospect Heights is full of brownstones and Italianate rowhouses built between 1880 and 1910, and the chimneys on those buildings were designed for coal. Most were converted to gas or oil decades ago, and the flues were never rebuilt to match. That mismatch is where bad cap and crown work happens, and it’s why homeowners here call us after a cheaper outfit guessed at the problem.
We inspect with a camera before we quote. If your crown needs a coating rather than a rebuild, we say so. If the cap you bought at a hardware store won’t seat on an irregular coal-era stack, we show you why on the monitor instead of just selling you a custom one.
Our technicians have up to 11 years of experience, and that includes the shared party-wall stacks that are standard on these blocks. We also carry professional-grade materials – Olympia Chimney, Famco, Copperfield, DuraFlex – so the repair matches the building. We serve Prospect Heights directly and reach the blocks around Vanderbilt Avenue, Underhill Avenue, and the Eastern Parkway edge without a long wait. Our strong local reputation comes from doing the diagnostic work first.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Prospect Heights
Cap Installation in Prospect Heights
A new cap keeps rain, birds, and debris out of the flue and protects the crown below it from constant wetting. On Prospect Heights brownstones, the stack is often wider or more irregular than a modern flue tile, so we measure the actual crown footprint before ordering. We install single-flue and multi-flue caps sized to the original masonry, not to a stock size that leaves gaps.
Cap Replacement in Prospect Heights
Old caps rust through, warp, or get knocked loose by wind off the taller rooflines. If your cap is rattling or sitting crooked, it’s letting water in at the seams. We pull the old unit, check the crown and flue top underneath, and fit a replacement that actually seats. Many of the caps we replace here were sized for a flue tile that the chimney never had.
Crown Repair in Prospect Heights
The crown is the concrete or mortar wash at the top of the chimney, and it takes the worst of the freeze-thaw cycle. When mortar joints open at the crown, water tracks down the flue and into the smoke chamber. We rebuild crowns with proper slope and overhang so water sheds away from the brick face. On shared stacks, we check the neighbor’s side of the crown too before we start.
Crown Coating in Prospect Heights
Not every crown needs a full rebuild. Hairline cracks and surface spalling can often be sealed with a flexible crown coating that moves with the masonry instead of cracking again. We only recommend coating when the camera and a hands-on check show the crown is structurally sound underneath. If it isn’t, a coating just hides a failing crown for a season or two.
Why These Chimneys Need More Than a Store-Bought Cap
Most Prospect Heights brownstones share a single party-wall chimney stack with a neighbor. That changes everything about a cap and crown job. A new crown or cap on one unit can alter the draft and the way water sheds for the adjacent flue, and if the two flues vent into a shared stack, the work on one side affects the other. Joint inspection and written notice to the neighbor are a standard first step here, not an upsell.
The original coal-burning fireplaces in these buildings also have a smoke shelf and a narrow throat that standard brushes can’t reach. Debris collects there, and a camera is the only way to see it. The freeze-thaw cycle in this humid continental climate – cold winters, hot summers – routinely opens mortar joints at the crown and spalls the brick just below it. Summer humidity works the other way, expanding creosote and corroding dampers. Both cycles hit the crown first, because it’s the part of the chimney exposed on all sides.
When a cap is replaced without a camera check, a cracked clay tile liner or a glazed creosote layer behind the smoke shelf can go unnoticed until the new cap disturbs it. That’s how a $400 cap turns into a liner conversation. We don’t let that happen here.

Trusted Brands We Service in Prospect Heights
We install professional-grade chimney products, and we name them because the materials matter as much as the labor. Olympia Chimney caps are built for the kind of tall, exposed stacks common on Prospect Heights rowhouses. Famco and Copperfield multi-flue caps fit irregular coal-era masonry better than generic units. When a camera inspection shows the liner behind the crown is failing, DuraFlex flexible liner systems are what we specify. We source these materials per job and schedule the work so you’re not waiting weeks for a part. No guesswork, no hardware-store substitutes on a 130-year-old chimney.
Common Chimney Cap & Crown Problems We See in Prospect Heights Homes
- Crown cracks along the mortar wash. Freeze-thaw opens joints at the crown, and water tracks down the party-wall flue into the neighbor’s smoke chamber. This is the single most common call we get on shared stacks here.
- Caps sized for modern flue tiles that won’t seat. A store-bought cap on an original coal-era stack leaves gaps that admit rain and animals, which worsens spalling on the crown below. The cap looks installed and does nothing.
- Skipped camera inspections hiding liner damage. Without a camera, a cracked clay tile or third-degree creosote glaze behind the smoke shelf stays invisible until a cap replacement disturbs it. That’s the expensive surprise we try to prevent.
- Spalled brick just below the crown. Once water gets behind the crown, the brick face below starts to flake and pit. Left alone, the crown repair turns into a masonry rebuild and a much bigger bill.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Prospect Heights, NY
These are typical estimates for the Prospect Heights market, not fixed prices. The written estimate after inspection sets the final number.
| Service | Typical Range in Prospect Heights |
|---|---|
| Crown coating (sealing hairline cracks) | $375 – $650 |
| Crown rebuild (standard single-flue) | $750 – $1,450 |
| Standard cap installation (single-flue) | $275 – $550 |
| Multi-flue cap (shared stack) | $550 – $1,100 |
| Custom cap fabricated to original stack | $750 – $1,600 |
What moves you up or down the range: whether the crown is structurally sound enough to coat or needs a rebuild, whether the stack is shared with a neighbor, and whether the cap is a stock size or a custom fabrication. On shared party-wall stacks, the joint inspection adds time but usually prevents a second visit. Estimates are free. We inspect with a camera, show you what we see, and quote before any work starts.
We Also Serve Cities Near Prospect Heights
We work the blocks around Prospect Heights regularly, and we also cover Prospect Heights neighbors in Clinton Hill, Park Slope, Crown Heights, and Brooklyn Heights. The housing stock is similar across these areas – brownstones and rowhouses with the same coal-era chimneys – so the inspection approach carries over. If you’re just over the boundary from Prospect Heights, call and we’ll confirm coverage before booking. Our chimney cap & crown team handles all of these neighborhoods the same way: camera first, quote second, work third.
Serving Prospect Heights, NY – Our Local Coverage Area
We serve Prospect Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Prospect Heights
Yes, but the job needs a joint inspection first. Shared party-wall stacks vent two flues inside one masonry structure, and changing the crown or cap on your side can alter draft and water shedding for your neighbor’s flue. We inspect both sides with a camera, document the condition, and give written notice to the neighbor before work starts. In most cases the repair stays on your side of the stack, but we don’t assume that until the camera confirms it. Call (866) 937-8201 for a free estimate.
The camera and a hands-on check decide it. A crown with hairline surface cracks and sound masonry underneath can often be sealed with a flexible coating that moves with the brick. A crown with open mortar joints, missing sections, or spalled brick just below it needs a rebuild with proper slope and overhang. We won’t quote a coating on a crown that’s already failing, and we won’t quote a rebuild on a crown that just needs sealing. Call (866) 937-8201 for an exact quote.
Because the original coal-era stacks here weren’t built to modern flue-tile dimensions. A standard cap sized for today’s flue tile won’t seat properly on an irregular 1880s brick crown, leaving gaps that admit rain and animals. Those gaps also worsen spalling on the crown below. A custom cap fabricated to the actual stack footprint closes that gap. We measure on site and order the cap per job rather than forcing a stock size to fit.
Yes. If the camera shows a cracked clay tile or a glazed creosote layer behind the smoke shelf, installing a new cap without addressing it can disturb the damage and make it worse. The original coal-era smoke shelf and narrow throat trap debris a standard brush can’t reach, so the camera is essential before any cap goes on. If the liner is failing, we’ll show you the footage and discuss a DuraFlex liner or HeatShield resurfacing before we quote the cap.
You should see the crown from above, the flue interior down past the smoke shelf, and the neighbor’s side of a shared stack if there is one. Ask for footage of the flue top where the cap seats, the mortar joints at the crown, and the clay tile or liner condition below. If the technician can’t show you any of that, don’t approve the work. Nothing we recommend gets quoted without camera evidence you can watch yourself.
Book Your Chimney Cap & Crown Inspection in Prospect Heights
If your crown is cracked, your cap is loose, or you’ve never had either checked on a brownstone this old, call us. We inspect with a camera, show you what we find, and give you a written estimate before any work begins. Nothing gets recommended that you can’t see on the monitor. Chimney Sweep Sunset Park serves Prospect Heights and the surrounding Brooklyn neighborhoods, and our technicians have up to 11 years of experience with the shared stacks and coal-era chimneys these blocks are full of. Call (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.