Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Midwood
A missing or crumbling crown on a Midwood chimney is a roof-level leak waiting for the next freeze. We handle chimney cap and crown work across Midwood, from the brick two-families off Avenue M to the semi-detached blocks near Ocean Parkway, and we start with a camera inspection so you can see the problem before anyone quotes a repair. If a cap is gone, a crown is cracked, or you’ve been told the whole stack needs rebuilding, call (866) 937-8201. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Midwood Homeowners Call Chimney Sweep Sunset Park for Chimney Cap & Crown
Midwood’s older chimneys don’t fail the way a fireplace chimney fails, and that distinction is most of why homeowners here call us. In this part of Brooklyn, a cap-and-crown call is often really a vent-safety job. The chimney on a 1920s or 1930s brick two-family usually serves a gas boiler and water heater in a shared basement mechanical room, not a fireplace. That appliance is venting into an unlined stack built for coal or oil, and the flue connection in the basement has to be checked before anyone climbs the roof.
We serve Midwood with the same team that handles the rest of our Chimney Cap & Crown work, so what the inspection finds gets addressed by the people who found it. Our technicians have up to 11 years of experience, and that shows up in how we read an aging brick stack: the crown, the flashing, the tile liner, and the appliance connection below all get looked at together, because on these houses they fail together. We diagnose before we quote. Nothing is recommended on a verbal say-so, and that rule matters most on old Midwood chimneys, where upselling is routine.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Midwood
Custom Cap
A universal cap is the wrong answer for a lot of Midwood stacks, especially where the original flue tile and the stack dimensions don’t match anything off a shelf. We measure the flue openings and have a custom cap built to fit the actual stack, sized so the boiler and water heater flues still draft correctly. On a semi-detached house, the cap has to clear the neighbor’s roofline and the shared parapet without blocking either flue.
Crown Repair
Most 1930s Midwood crowns were poured flat, and a flat crown holds water instead of shedding it. Through the freeze-thaw cycle that water gets into the brick, then pushes spalling and efflorescence down the stack face. We rebuild or repair the crown to a proper slope so meltwater runs off, and we show you the cracked crown and any gaps at the flashing on screen before we touch it.
Multi-Flue Cap
Shared stacks are the norm in Midwood’s two-family and semi-detached housing stock, and one box often covers two or three flues that serve different appliances. A multi-flue cap has to be sized to each flue so the orphaned water-heater flue isn’t choked. Fit one that blocks draft and you’ve invited carbon monoxide backdraft instead of stopping it. We size each opening individually and check the basement flue connection before the cap goes on.
Crown Coating
Where the crown is sound but the surface has hairline cracks, a coating can extend its life without a full rebuild. We use HeatShield-grade materials for crown and flue resurfacing, which is repair-grade work that goes past a standard sweep. If the crown is too far gone for a coating to hold, we’ll tell you plainly and show you the footage that says so.
Trusted Brands We Service in Midwood
We name the brands we install, because the materials matter as much as the labor. For caps and crown work in Midwood we work with Gelco and Copperfield caps, Olympia Chimney components, and Famco multi-flue caps, and we match the cap to the stack rather than forcing a generic fit. We don’t claim to stock parts on a truck; we source the right component for your flue and get it installed. When a crown needs resurfacing rather than replacement, HeatShield materials are what we reach for. Professional-grade parts, sized to the actual stack.

Common Chimney Cap & Crown Problems We See in Midwood Homes
- Flat or cracked 1930s mortar crowns. These were poured without a slope, so meltwater sits on them and works into the brick. Through Midwood’s freeze-thaw cycle that shows up as spalling and efflorescence running down the stack face.
- Generic caps sold as universal fits. A cap that’s too tight over an orphaned water-heater flue in an unlined 1930s stack blocks draft and invites carbon monoxide backdraft. Fit matters more than price on these chimneys.
- Upsell pressure with nothing to back it. Reline or rebuild quotes given on a verbal say-so, with no camera footage of the flue liner or smoke chamber for the homeowner to judge. You should be able to see what the tech sees.
- Abandoned or orphaned flues in shared stacks. Many Midwood stacks had their original coal or oil flue retired and now serve only the boiler or water heater. Those flues still need a cap and an annual inspection.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Midwood, NY
A typical single-flue cap installation in Midwood runs $180 to $450, and a custom or multi-flue cap runs $350 to $900 depending on flue count and sizing. Crown repair, where the crown is rebuilt or repaired to a proper slope, typically runs $400 to $1,200. A crown coating runs $250 to $600. These are estimates for Midwood’s market, and the written estimate sets the final price. What moves the number: how many flues the stack serves, whether the crown needs a rebuild or a coating, and how much of the brick face has already spalled. Estimates are free.
We Also Serve Cities Near Midwood
We serve Midwood and the neighborhoods around it, including Flatlands, Kensington, Bensonhurst, and Flatbush. The housing stock and chimney types are similar across these blocks, so the same camera-first approach applies. If you’re just outside Midwood, call and we’ll book you in for a look. You can also read more about our Midwood service area.
Serving Midwood, NY – Our Local Coverage Area
We serve Midwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Midwood
Yes. Any flue that vents an appliance needs a cap, whether or not there’s a fireplace attached. An uncapped flue takes in rain, debris, and animals, and on an unlined 1930s stack that moisture accelerates spalling and can disrupt draft on the boiler flue. A properly sized cap protects the flue and keeps the appliance venting the way it should. Call (866) 937-8201 for an exact quote – estimates are free.
You should be able to see the evidence yourself. A Level 2 inspection with a camera shows the cracked crown, the gaps at the flashing, and the condition of the flue liner on screen, so you can judge whether the repair is real. Nothing gets recommended without camera evidence you can see. If a quote comes with no footage, ask for it. Call (866) 937-8201 for an exact quote – estimates are free.
Most patched crowns crack again because the patch didn’t fix the slope. The original 1930s crown was poured flat, so water sits on it, freezes, and opens the same cracks season after season. A coating or patch buys time, but a crown rebuilt to a proper slope is what actually stops the cycle. We’ll show you which one your crown needs. Call (866) 937-8201 for an exact quote – estimates are free.
Yes, a multi-flue cap can cover both, provided it’s sized to each flue opening individually. On Midwood semi-detached stacks, one flue often serves the boiler and another the water heater, and if the cap chokes either opening you get draft problems instead of protection. We measure each flue before specifying the cap. Call (866) 937-8201 for an exact quote – estimates are free.
Yes, and on Midwood’s older stacks it’s the part that matters most. A cap-and-crown job touches the roofline, but the real story is often below it: an unlined 1930s flue serving a gas boiler, or a flue connection in the basement that’s pulling poor draft. A Level 2 inspection with a camera covers both ends of the flue so the cap goes on a stack that’s actually sound. Call (866) 937-8201 for an exact quote – estimates are free.
Get Your Midwood Chimney Cap & Crown Estimate
If a crown is cracked, a cap is missing, or you’ve been quoted a rebuild and want to see the evidence first, call (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We diagnose before we quote, show you the camera footage, and tell you plainly when work can safely wait. That’s the standard on every Midwood chimney we look at.
Written by the team at Chimney Sweep Sunset Park.