Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Brooklyn Heights
If you’re looking at a rusted cap or a cracked crown on a brownstone near the Promenade, we can help. We handle chimney cap and crown work across Brooklyn Heights, and our technicians have up to 11 years of experience reading the salt-air damage that hits chimneys on the East River side hardest. This is a preservation job before it’s a repair job, and shared party-wall stacks make it a careful one. Call (866) 937-8201. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Brooklyn Heights Homeowners Call Chimney Sweep Sunset Park for Chimney Cap & Crown
We work on Brooklyn Heights chimneys often enough to know the rhythm of the neighborhood. The long rows of 1840s – 1890s Greek Revival, Italianate, and Romanesque townhouses mean most jobs involve original masonry, terra cotta liners, and a stack shared with the next building over. That’s a different job than a cap on a newer suburban chimney, and we treat it that way.
Our technicians have up to 11 years of experience, and a strong local reputation in Brooklyn Heights built on honest diagnosis rather than a sales pitch. We diagnose before we quote, which means no surprise add-ons after the truck arrives. If a crown can wait a season, we’ll tell you so.
Getting to Brooklyn Heights is straightforward from our service area, and we schedule visits around the neighborhood’s parking realities on the narrow streets off Hicks and Henry. We connect you with independent local professionals who are licensed and insured as their state requires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Brooklyn Heights
We’ll name the sub-services up front so you know exactly what a visit covers. Our chimney cap & crown work goes deeper than swapping a lid on top of the flue. Here’s what we actually do.
Cap Installation
A new cap installation on a Brooklyn Heights brownstone means matching the right cap to the flue count, not just the flue diameter. Many of these chimneys vent multiple flues, so a single-flue cap doesn’t fit the stack. We install Gelco and Olympia Chimney caps sized to your actual chimney and specify stainless where the East River exposure justifies it.
Cap Replacement
We replace a lot of corroded galvanised caps in Brooklyn Heights. Salt air coming off the water eats through galvanised steel faster than most homeowners expect, and once the cap is gone the flue is open to rain and birds. A stainless replacement is the right call on a coastal block, and we explain why before we quote.
Crown Repair
Crown repair on Brooklyn Heights townhouses usually means addressing cracks from freeze-thaw cycles and spalling brick around the edge. The crown is the sloped concrete or mortar top that sheds water away from the stack. When it cracks, water follows the path down into the flue. We rebuild and reshape the crown so it drains properly off the party wall.
Crown Coating
A crown coating is a protective layer over a crown that’s cracked but still structurally sound. On a lot of Brooklyn Heights chimneys this is the sensible middle option, cheaper than a full rebuild and effective at sealing hairline cracks. We use HeatShield and Copperfield products appropriate to masonry crowns, and we’ll tell you plainly when coating will hold and when a rebuild is the honest answer.
We also handle multi-flue caps and custom caps where the standard sizes don’t fit an older stack.
Trusted Brands We Service in Brooklyn Heights
We work with professional-grade product lines, and we name the brands because the materials matter as much as the labor. For caps and crowns in Brooklyn Heights we specify Gelco, Olympia Chimney, Famco, and Copperfield, and we use HeatShield for masonry crown work. These are the same materials commercial and restoration contractors use, not hardware-store generics. We don’t claim to stock parts locally, but we source the right components for your stack and get them installed. From the firebox to the crown, everything in one visit.

Common Chimney Cap & Crown Problems We See in Brooklyn Heights Homes
The salt air near Brooklyn Heights is the common thread in almost every problem we find. Here’s what fails, and in what order.
- Galvanised cap corrosion. Salt-laden rain driven off the East River eats through galvanised caps and flashing on the water-facing side of buildings first. Once the cap rusts out, water runs straight into the flue.
- Cracked mortar crowns from freeze-thaw. Nor’easters and the freeze-thaw cycle crack mortar crowns, and the spalling brick around the crown opens a path for water to reach the smoke chamber. The damage compounds season by season.
- Shared party-wall stack failures. A cracked crown on one townhouse can send water into a neighbor’s flue through the same stack. In Brooklyn Heights this turns a simple repair into a stack-mapping job before any work begins.
- Dormant fireplaces with open flues. Many converted gas fireplaces in Brooklyn Heights still have an unsealed flue, which lets rain and pests in once the cap is compromised. These need inspection even if the fireplace hasn’t been lit in years.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Brooklyn Heights, NY
Here’s what cap and crown work typically runs in Brooklyn Heights. These are estimates; the written estimate sets the final price, and the estimate itself is free.
| Single-flue cap installation (stainless) | $250 – $550 |
| Multi-flue or custom cap | $500 – $1,100 |
| Cap replacement (removal and reinstall) | $300 – $650 |
| Crown repair (rebuild and slope) | $600 – $1,400 |
| Crown coating (seal hairline cracks) | $350 – $700 |
Cost moves most on flue count, stack height, and how much spalling brick needs attention around the crown. A shared party-wall stack may require a camera inspection first to map the flues, which we’ll explain in the estimate. Nothing is recommended without evidence you can see for yourself, and if the work can safely wait a season, we’ll say so. Call (866) 937-8201 for a free estimate.
We Also Serve Cities Near Brooklyn Heights
We work throughout Brooklyn Heights and the surrounding neighborhoods. If you’re in Carroll Gardens, Red Hook, Clinton Hill, or Park Slope, the same salt-air and shared-stack issues apply, and we can help there too. Call and tell us your neighborhood so we can plan the right visit.
Serving Brooklyn Heights, NY – Our Local Coverage Area
We serve Brooklyn Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Brooklyn Heights
Once a year is the right interval for a Brooklyn Heights chimney exposed to salt air. Coastal exposure accelerates corrosion on caps and flashing, and an annual look catches a failing galvanised cap before the crown beneath it cracks.
Stainless steel resists salt-air corrosion far better than galvanised. On East River-facing chimneys, galvanised caps rust through in a fraction of the time, which is why we recommend stainless for Brooklyn Heights installations. Call (866) 937-8201 to talk through your options.
The cap typically fails first. Galvanised caps corrode from salt exposure before the mortar crown cracks, and once the cap is gone, water reaches the crown and starts the freeze-thaw damage that follows. Catching the cap early is what saves the crown.
Yes. In Brooklyn Heights, shared party-wall stacks mean a cracked crown on one building can send water into a neighbor’s flue through the same structure. That’s why we start with a camera inspection to map the flues before recommending repair. It’s also why a repair that can wait should be scheduled before the next hard freeze. Call (866) 937-8201 for a free estimate.
A crown repair in the landmarked district should respect the building’s historic masonry, so we match materials and profile to what’s already there. Cap and crown work stays mostly out of public view, but we keep changes in keeping with the original stack. It’s the kind of care a Brooklyn Heights brownstone deserves.
Get Your Chimney Cap & Crown Checked in Brooklyn Heights
If your cap looks rusted or your crown has visible cracks, it’s worth having it looked at before the next nor’easter. We’ll inspect the cap, check the crown for freeze-thaw damage, and give you a written estimate before any work begins. Call (866) 937-8201 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.