Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Sunset Park Homeowners
A chimney can look fine from the sidewalk and still be failing where you can’t see it. Cracked flue tiles, a crumbling crown, creosote packed into a bend, or a liner that’s pulled apart at a joint, none of that shows from the street. A proper inspection opens the system up and puts evidence in front of you. Our technicians have up to 11 years of experience reading exactly these problems, and we back what we find with camera footage and a written report, not a verbal guess.
We work on Sunset Park’s brick rowhouses and older two-family homes regularly. Many of these chimneys were built for coal and later converted, which means the flue that served the original heating plant isn’t always the flue your fireplace or boiler needs. That mismatch is one of the most common things we document in Sunset Park. We can often schedule a same-day inspection when you call in the morning. Call (866) 937-8201 to book one.
What Our Chimney Inspection Service Includes
Level 1 Inspection
A Level 1 inspection is the routine annual check: we look at all the readily accessible parts of the chimney and venting, the firebox, damper, smoke chamber, flue, and the exterior at ground level and from the roof. It’s what you need when nothing has changed and the chimney has been in normal service. We run this as part of a standard annual sweep, so you get the cleaning and the assessment in one visit rather than two separate appointments.
Level 2 Inspection
A Level 2 inspection goes further into the flue and the accessible portions of the attic and crawl spaces, and it’s the level required after a chimney fire, after a change in fuel type or appliance, or when a property changes hands. It’s also the right call when you’ve noticed a new smell, draft problem, or staining. We use video scanning during a Level 2 so the interior of the flue is documented rather than assumed, and you see the same images we’re working from.
Level 3 Inspection
A Level 3 inspection is diagnostic work: it’s what happens when the first two levels turn up a defect that can’t be assessed without opening something up, such as a hidden section of flue or a suspected breach behind masonry. These are not routine, and we don’t recommend one unless the earlier findings justify it. When it is warranted, we explain exactly what needs to be accessed and why before anything is opened.
Camera Inspection
Camera inspection puts a video scope down the flue so we can see cracks, gaps at tile joints, heavy glazing, and offsets that a flashlight at the top can’t reveal. It’s the tool that turns “the chimney seems okay” into a documented finding you can act on or file away. We include the footage and a photo report so you have your own record, which matters if you’re dealing with an insurer or a buyer.
Flue Inspection
Flue inspection focuses on the passage itself: its size relative to the appliance, its condition, and whether it’s clear and properly lined. A flue that’s too large for the appliance runs cold and drafts poorly; one that’s damaged leaks smoke and heat where it shouldn’t go. We check the flue against the appliance it serves rather than judging it in isolation, which is where a lot of vague “your flue is fine” answers fall apart.
Real Estate Inspection
When a house is being sold in Sunset Park or the surrounding neighborhoods, the buyer, seller, or attorney often needs a documented chimney report as part of the transaction. We provide a written assessment with photos that separates what must be addressed before closing from what can wait and be scheduled later. That distinction saves a lot of needless negotiation on both sides.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with professional-grade materials, and that shapes how we read a chimney during inspection. When we find a HeatShield application that’s been properly installed, for instance, we know what a sound resurfaced liner should look like from the inside, and we can tell the difference between a genuine repair-grade resurfacing and a cosmetic patch. We use HeatShield ourselves for flue resurfacing when a liner is compromised but structurally still worth restoring, which is a repair most sweep-only outfits simply can’t offer.
DuraFlex flexible liner systems are the other material we encounter and install often, and inspection of a metal liner is a different job from inspecting clay tile. We know where a DuraFlex liner wears, how it sits at the top plate and the appliance connector, and what a poor connection looks like on camera. The same familiarity applies to Olympia Chimney and Gelco components we come across on caps, crowns, and venting. Whether your chimney has a HeatShield liner, a DuraFlex system, or any other make, we can inspect it and tell you plainly what condition it’s in.
Signs You Need Chimney Inspection Right Now
- You haven’t had it inspected in over a year. Creosote builds up with every fire, and the annual check is what catches it before it becomes a fire hazard. If it’s been more than a season, book it before the next burning season starts.
- Smoke rolls back into the room. Backdrafting points to a blockage, a flue sized wrong for the appliance, or a pressure problem in the house. It’s a draft and venting issue that an inspection can pin down quickly.
- You smell a sharp, acrid odor when the fireplace isn’t in use. That smell usually means creosote or a draft reversal pushing flue gases into living space. It’s worth a look before you light another fire.
- There’s staining or white efflorescence on the exterior brick. White chalky deposits or dark streaks on the chimney chase often signal water getting in through a failing crown or cap. Water damage compounds, so earlier is cheaper.
- You’ve had a chimney fire, even a small one. Many chimney fires go out on their own and go unnoticed, but they can crack tiles and warp a liner. A Level 2 inspection after any suspected fire is the standard response, not an upsell.
Our Chimney Inspection Process – Step by Step
- 1
We talk through the history first. Before anyone goes on the roof, we ask what the chimney serves, how often it’s used, and whether anything has changed recently. That context decides whether this is a Level 1 or something deeper, and it keeps you from paying for an inspection level you don’t need.
- 2
We inspect the firebox and appliance connection. We check the damper, the smoke chamber, and how the appliance connects to the flue. Poor connections here are a frequent cause of smoke problems and carbon monoxide risk, and they’re easy to miss if you only look down from the top.
- 3
We scan the flue with a camera. Video scanning documents the interior so cracks, gaps, and offsets are recorded rather than guessed at. You see the footage and the still images in the report.
- 4
We check the exterior, crown, and cap. From the roof we assess the crown, flashing, cap, and brickwork for water entry and structural movement. A failing crown is one of the most common and most fixable problems we find on Sunset Park rowhouses.
- 5
We give you a written report and a clear recommendation. The report separates what needs attention now from what can safely wait, with photos for anything we flag. If repair work is needed, the same team handles it, whether that’s a HeatShield resurfacing, a DuraFlex liner, or crown and cap work, so nothing gets handed off to a second contractor.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Sunset Park?
A typical Level 1 inspection in Sunset Park runs $100 to $200 when it’s combined with an annual sweep, and a Level 2 with camera scanning typically runs $200 to $400 depending on how accessible the flue and attic are. A Level 3, which involves opening concealed sections, is a larger job and is quoted after we’ve seen what’s involved. Real estate inspections fall in the Level 2 range in most cases.
What moves the price: the inspection level, whether the chimney has a metal liner or clay tile, roof access, and whether camera work is needed. How to avoid overpaying is simple, ask which level you’re getting and why before anyone starts, and insist on seeing the camera footage for any problem you’re told about. Our estimates are free and given per job in writing, so the number on the estimate is the number you pay. We don’t quote repairs off a glance; we diagnose first, then price the fix.
| Inspection Type | Typical Estimated Range |
|---|---|
| Level 1 (with annual sweep) | $100 – $200 |
| Level 2 with camera scan | $200 – $400 |
| Real estate inspection | $200 – $400 |
| Level 3 diagnostic | Quoted after assessment |
If you’re weighing whether to book, call (866) 937-8201 and we’ll tell you which level fits your situation. Estimates are free.
Chimney Inspection Near Sunset Park – Our Service Area
We serve homeowners across Sunset Park and the neighborhoods around it, including Borough Park, Kensington, Bay Ridge, Dyker Heights, Carroll Gardens, Red Hook, Park Slope, Flatbush, Bensonhurst, Midwood, and Prospect Heights. If you’re nearby and want a chimney inspection in a neighboring area, we can usually schedule it quickly, with same-day slots often available when you call early. We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm.
For the full picture of what we do across the community, see our chimney sweep service in Sunset Park. Homeowners in Kensington can book the same inspection directly through that page.
Serving Sunset Park, NY – Our Local Coverage Area
We serve Sunset Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Sunset Park
A chimney inspection is a documented assessment of your chimney’s condition, from the firebox and damper up through the flue to the crown and cap. It’s graded in levels: Level 1 for a routine annual check, Level 2 for camera scanning and post-fire or real-estate situations, and Level 3 when concealed defects need to be opened up. We tell you which level you need and why before we start. Call (866) 937-8201 for a free estimate.
A Level 1 inspection typically takes 45 minutes to an hour, while a Level 2 with camera scanning usually runs one to two hours. Timing depends on roof access and how much of the flue needs to be documented. We’ll give you a realistic window when you book. Call (866) 937-8201 to schedule.
A Level 1 inspection typically runs $100 – $200, and a Level 2 with camera scanning runs $200 – $400. The written estimate sets the final price, and our estimates are free. We don’t recommend work beyond what the inspection evidence supports. Call (866) 937-8201 for an exact quote.
Yes, we inspect and work on DuraFlex flexible liners and HeatShield resurfaced flues, along with Olympia Chimney and Gelco components. Our familiarity with these materials means we can tell a sound installation from a failing one when we’re reading the camera footage. Whether your chimney has one of these or another make, we can help. Call (866) 937-8201.
We can often fit a same-day inspection when you call in the morning. We answer 24/7 on the phone line, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. Call (866) 937-8201. A call outside dispatch hours is booked into the next opening.
We stand behind the inspection work and the findings in our written report, and our repair work carries a satisfaction guarantee. Any recommendation we make is tied to camera evidence you can see for yourself. If you’re ever unsure about a finding, ask and we’ll show you the footage. Call (866) 937-8201.
Clear the firebox of ash and any unburned wood, and make sure we can get to the fireplace and, if needed, the attic access. If you have prior inspection reports or receipts for past liner work, have them ready. That’s all we need from you; we handle the rest from the roof down.
Schedule Your Chimney Inspection Service in Sunset Park Today
Book a chimney inspection with a team that shows you the evidence and tells you plainly what can wait. Our technicians have up to 11 years of experience, and we handle everything from the firebox to the crown in one visit. Call (866) 937-8201 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.