Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Sunset Park
If you’re seeing rust streaks on a chimney cap, crumbling mortar on a rowhouse stack, or a damp smell near the flue, call (866) 937-8201. We handle chimney repair across Sunset Park, from the rowhouse blocks along 5th Avenue to the taller tenements near 8th Avenue. We know this neighborhood’s chimneys because we work on them constantly: most of them vent oil and gas furnaces, not wood fires, and the marine air here chews through caps and crowns faster than anywhere else in Brooklyn. Our technicians have up to 11 years of experience. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Sunset Park Homeowners Call Chimney Sweep Sunset Park for Chimney Repair
Most chimney companies in Sunset Park are sweep-only crews or generalists who hand off structural work to someone else. We aren’t either. Our service runs the full system: sweeping, inspection, chimney repair, cap and crown work, and liner replacement. When a Level 2 inspection turns up something wet and cracked, the same team fixes it. You don’t get a report and a shrug.
We name the materials we install because the material is half the job on a coastal chimney. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – professional-tier lines, not hardware-store generics that rust through in two seasons. HeatShield resurfacing, in particular, is repair-grade work most sweep companies can’t offer. Our technicians have up to 11 years of experience, and a strong local reputation built on doing the diagnostic work before quoting.
Response to Sunset Park is straightforward. We’re in these blocks regularly. Call and we’ll book you into the next opening, and the estimate is free before any work begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Sunset Park
Salt air is the defining problem here. It attacks caps, crowns, and flashing first – long before creosote ever becomes the issue. So chimney repair in Sunset Park is mostly about water and corrosion, and the fixes are structural.
Mortar Repointing
The soft, lime-heavy mortar in late-19th and early-20th-century Sunset Park brick was never built for the damp, salty air rolling off the waterfront. Repointing means grinding out the failed joints to a proper depth and packing them with new mortar matched to the brick’s hardness. Too hard a mortar mix and the brick faces spall instead. We match the mix to what’s already there.
Spalling Brick Repair
Spalling is when brick faces pop and flake away. In Sunset Park it’s nearly always freeze-thaw meeting water that got in through the crown or a bad flashing joint. The water freezes, expands, and pushes the face off. We replace the damaged units and fix the source, so you’re not patching the same spot every couple of years.
Chimney Waterproofing
Waterproofing is the best protection a coastal chimney has. We apply a breathable vapor-permeable sealer that keeps rain and salt-laden damp out while letting the masonry dry from the inside. On the older stacks facing the harbor, waterproofing after repointing and crown repair is what stops the cycle from starting over.
Flashing Repair
Flashing is the metal where the chimney meets the roof – and on Sunset Park rowhouses it’s the most common entry point for water. A failed flashing joint sends water down into the roof deck and the flue. We repair flashing with proper metal, sealed into the masonry, before it costs you interior work.
Trusted Brands We Service in Sunset Park
The cap you buy matters as much here as the work putting it on. A galvanised cap can rust through in a few seasons of Sunset Park marine air; a stainless or copper cap holds up far longer. We install and work with DuraFlex flexible liner systems for full replacements, HeatShield for flue resurfacing, and Olympia Chimney components. We source professional-grade parts rather than generics. When we quote a repair, we tell you which material we’re using and why it fits a coastal stack.

Common Chimney Repair Problems We See in Sunset Park Homes
- Rust-through caps letting water in. Galvanised caps fail fast in the salt air, dripping water onto the crown and into the flue. Stainless caps last far longer on a coastal chimney.
- Cracked crowns from salt damp and freeze-thaw. Hairline cracks spread and admit water that freezes and spalls the brick below. A properly sloped, rebuilt crown sheds water instead of absorbing it.
- Original unlined or clay-tile flues cracking. Many Sunset Park chimneys were never lined for the oil and gas furnaces they now vent, plus shared water heaters. A Level 2 inspection catches the cracks before backdrafting becomes a risk.
- Failed flashing at the roof line. The joint between chimney and roof on a century-old rowhouse is a frequent water entry point. Repair the flashing and you protect the roof deck and the flue at once.
On century-old brick rowhouses near the waterfront, the chimney crown and cap often show rust-through and hairline cracks from salt air and freeze-thaw, letting water into the flue and mortar joints. A qualified local pro typically inspects at Level 2, replaces the cap with a stainless model, rebuilds the crown with a slope, and repoints spalling brick before waterproofing the stack. That sequence – diagnose, fix the source, then protect – is what keeps a coastal chimney sound.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Sunset Park, NY
Repair pricing depends on how far the corrosion goes, so we quote per job with a written estimate. Typical estimated ranges for Sunset Park:
| Repair | Typical estimated range |
|---|---|
| Mortar repointing (section) | $350-$900 |
| Spalling brick repair | $250-$700 |
| Chimney waterproofing | $300-$600 |
| Flashing repair | $300-$750 |
| Stainless cap installation | $200-$500 |
| Chimney crown rebuild | $500-$1,200 |
What moves the number is access (shared party walls and awkward cleanouts on these rowhouses), how much brick needs replacing, and whether the flue needs a new liner. The written estimate sets the final price, and it’s free before any work starts. We don’t recommend anything we can’t show you with photos.
We Also Serve Cities Near Sunset Park
The same salt-air problems follow the shoreline. We also take on chimney repair in Sunset Park and the surrounding neighborhoods: Borough Park, Kensington, Bay Ridge, and Dyker Heights. If your chimney is near the water, the caps and crowns face the same corrosion. Call for a free estimate in any of these areas.
Serving Sunset Park, NY – Our Local Coverage Area
We serve Sunset Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Sunset Park
Salt air makes corrosion the leading failure, not creosote. The caps, crowns, and flashing on a coastal Sunset Park chimney go before the flue build-up ever becomes the problem. Galvanised caps rust through in a few seasons, and the water they let in does the rest. Call (866) 937-8201 for an exact quote.
Because the damage is structural, not soot. A century of damp, salty air and freeze-thaw cracks the mortar and pops the brick faces, which cleaning won’t fix. Repointing and spalling brick repair put the masonry right before it spreads. Estimates are free, so call and we’ll show you what’s failing.
Yes – more than ever. A cracked crown or rusted cap lets water and debris into a flue that’s venting combustion gases, and a shared flue leaves little margin for error. A sound cap and crown keep the flue dry and flowing. Call for a free inspection before the next cold spell.
A Level 2 inspection is the usual starting point. Shared party walls and hard-to-access flues mean a camera inspection is the only reliable way to see cracks before they matter. We diagnose with photos you can review. Call (866) 937-8201 to book it.
Stainless, in almost every case. Galvanised caps rust through fast in the marine air here, while stainless holds up to the salt and damp. It costs more up front and far less over time. Call for an exact quote on a stainless cap.
Get Your Sunset Park Chimney Repaired
Water and salt do more damage every season they’re left alone, and the repair only gets bigger. We diagnose before we quote, show you the evidence with a camera inspection, and stand behind the work with a satisfaction guarantee. The estimate is free. Call (866) 937-8201 – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Sunset Park.