Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Park Slope
If smoke is rolling into your living room instead of going up the flue, or the mortar on your chimney stack is crumbling after another cold winter, you’re in the right place. We handle chimney repair across Park Slope, from quick mortar fixes on brownstone stacks to full liner replacement in century-old row houses. We know this neighborhood’s housing stock well, and we know how these chimneys are built. Call (866) 937-8201 for a free estimate. We answer 24/7.

Why Park Slope Homeowners Call Chimney Sweep Sunset Park for Chimney Repair
Park Slope’s chimneys are unlike most of what gets built today. The brownstones and Romanesque row houses that line the blocks here went up between the 1880s and 1920s, and many still carry their original interior brick chimneys, parged smoke chambers, and multiple flues serving fireplaces on every floor. That older construction demands a careful eye. When we walk into a Park Slope home, the plan starts with a camera inspection, not a sales pitch. We diagnose before we quote, and nothing gets recommended that you can’t see on the screen for yourself.
We connect you with independent local professionals who are licensed and insured as state law requires, and who know the party-wall chimney patterns common on blocks near Prospect Park and along Seventh Avenue. Our technicians have up to 11 years of experience, and they understand how these old stacks actually behave. Reach us at (866) 937-8201 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Park Slope
From the firebox to the crown, we cover the structural repairs that keep a Park Slope chimney working the way it should. The written estimate sets the final price, and you see the evidence before any work begins.
Mortar Repointing
Original brick flues in Park Slope brownstones were built with soft mortar that gives way over decades of freeze-thaw. Repointing rebuilds the joints without damaging the brick face. It’s often the honest alternative to a full rebuild that a low-bid crew might push.
Spalling Brick Repair
When the face of a brick flakes off after a hard winter, spalling has set in. We replace the damaged units and match the surrounding masonry so the repair disappears into the stack. Catching spalling early keeps the problem from spreading down the whole chimney.
Chimney Waterproofing
Cold, damp winters drive moisture into brick and mortar, and freeze-thaw does the rest. Professional-grade waterproofing keeps water out while letting the masonry breathe. We work with Gelco breathable sealers for this, because the wrong coating traps moisture and makes spalling worse.
Flashing Repair
A failed flashing joint is one of the most common sources of chimney leaks in Park Slope’s attached row houses. New flashing ties the stack to the roof and keeps storm water where it belongs. We check the roof-side detail as carefully as the firebox side.
Trusted Brands We Service in Park Slope
We name the brands we install because the materials matter as much as the labor. For liners and flue resurfacing, we work with DuraFlex and HeatShield; for caps and crowns, Olympia Chimney and Copperfield are part of the lineup, along with Famco and Gelco for masonry and waterproofing work. These are the same professional-grade materials that commercial and restoration contractors rely on, not hardware-store generics. We don’t keep parts on hand at a warehouse; we source what a Park Slope repair needs and move quickly to get it installed. When a HeatShield or DuraFlex liner is the right fix, we handle the full process in-house.
Common Chimney Repair Problems We See in Park Slope Homes
Here’s what tends to go wrong in these older stacks:

- Cracked and spalled clay-tile flues. Freeze-thaw cycles split the original tiles over time, but repointing and a spot repair often solve the problem without a full reline.
- Deteriorating parged smoke chambers. In 1890s – 1910s brownstones, these chambers fall apart and cause draft issues. An insert installed before the chamber is fixed just buries the problem.
- Shared party-wall chimneys. Attached row houses share stacks, so a blocked or cracked flue in one home can affect a neighbor’s draft and lead to repair being aimed at the wrong unit.
- Inserts and capped flues with old linings. Later renovations added fireplace inserts or capped flues without updating the lining, leaving a mismatch that a camera inspection catches fast.
See the difference
Before
After
Before
After
Before
AfterThe Shared-Stack Problem That’s Unique to Park Slope Row Houses
Park Slope’s density of attached brownstones means a lot of chimneys don’t stand alone. Chimney stacks often run right up through the shared party wall between neighbors, which is a construction pattern you won’t find repeated at this concentration outside Brooklyn’s brownstone belt. A cracked flue tile or a blocked flue in one home can quietly cause poor draft or smoke spillage next door, and that’s when misdiagnosis happens: a homeowner is told they need work on their own chimney when the real issue sits on the other side of the wall. Our technicians check party-wall chimneys from the roof as well as at the firebox so nothing gets missed. We inspect both sides of the stack before anyone quotes a repair.
Pricing for Chimney Repair in Park Slope, NY
Pricing is set per job by the written estimate, and market rates in this part of Brooklyn reflect the age and complexity of the housing here. A typical mortar repointing job in Park Slope runs $450 – $1,200 depending on how much of the stack needs work. Spalling brick repair usually lands in the $600 – $2,000 range. Chimney waterproofing runs roughly $300 – $850 for most residential stacks. Flashing repair typically costs $350 – $900. A full rebuild or HeatShield/DuraFlex liner work is quoted after camera inspection, since the scope depends on what the flue actually looks like. The estimate is free, and it’s clear about what can safely wait. Call (866) 937-8201 for an exact quote.
We Also Serve Cities Near Park Slope
The older brownstone neighborhoods north and west of here share the same chimney construction and the same repair needs. If you’re in Prospect Heights, Carroll Gardens, Red Hook, or Clinton Hill, we can help you too. The housing stock may differ block by block, but the honest approach is the same: camera evidence first, then a clear repair plan. Reach out and we’ll get you on the schedule.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Park Slope
Yes, a shared party-wall stack in a Park Slope row house can absolutely be the cause. When attached brownstones share a chimney stack, a cracked flue tile or blocked flue in one home can reduce draft or cause smoke spillage next door. We inspect party-wall chimneys from both the roof and the firebox before recommending any repair. Call (866) 937-8201 for a free estimate.
Repointing is enough when the mortar joints are failing but the brick itself is sound; a full rebuild is only needed when the masonry has lost structural integrity. In Park Slope’s 1880s – 1920s brownstones, the original soft mortar often gives out long before the brick does, so repointing fixes many stacks that get quoted for replacement. We show you what the camera and the roof view reveal before any work is agreed. Call (866) 937-8201 for a free estimate.
Look for visible cracks across the top of the crown, chunks of mortar or concrete flaking off, or water staining on the brick below the crown line. Park Slope’s cold, damp winters and repeated freeze-thaw cycles stress exterior crowns and mortar joints hardest, which is why fall is the peak inspection window before the heating season runs from roughly October through April. A cracked crown lets water into the stack, so it’s worth checking early. Call (866) 937-8201 for a free estimate.
Yes, a flexible liner can usually be installed in an original brick stack without opening the walls. DuraFlex flexible liner systems are made for exactly this and slide down the existing flue after the chimney is measured and cleaned. HeatShield resurfacing is another option when the flue can be restored rather than lined fresh. We measure first and quote the right approach. Call (866) 937-8201 for a free estimate.
Camera evidence is important because it lets you see the actual condition of the flue with your own eyes instead of taking a contractor’s word for it. Park Slope’s older chimneys are where the worst upselling in this trade happens, from unnecessary full relines to inserts pushed before a failing smoke chamber is fixed. Nothing we recommend comes without camera documentation and a photo report you can review. Call (866) 937-8201 for a free estimate.
When smoke spills into the room or the mortar starts falling, the fix should be based on what’s actually wrong with the stack, not on a guess. We diagnose first, show you the evidence, and quote the repair in writing. Your chimney repair work stays with the same team from inspection through the final install. Call (866) 937-8201 for a free estimate.
Written by the team at Chimney Sweep Sunset Park.