Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Flatbush
If you live in Flatbush and your chimney is older than your appliances, you’re in the right place. Flatbush chimneys are a different kind of repair work: 1920s and 1930s brick rowhouses and two-family homes, original clay tile flues, and crowns that have been through nearly a century of Brooklyn freeze-thaw. We know what these stacks look like inside, and we know why so many “just a cleaning” calls turn into real venting problems. Call (866) 937-8201 and we’ll book a visit, with fast dispatch from 7am to 7pm.

Why Flatbush Homeowners Call Chimney Sweep Sunset Park for Chimney Repair
Flatbush has no shortage of people who’ll sweep a flue. What’s harder to find is someone who can look at a crumbling crown, a spalled brick course, and a cracked clay tile and tell you which one is actually unsafe, which is cosmetic, and which can wait until spring. That’s the work we do.
Our technicians have up to 11 years of experience, and a good part of that has been spent in the two- and three-story brick buildings that line the avenues here. We come with cameras, not just brushes, and every recommendation we make is backed by footage you can watch on the spot. No mystery diagnoses, no surprise add-ons after someone’s already on the roof.
We also handle the whole system in one visit. Liner work, crown and cap installation, repointing, waterproofing, fireplace repair: it’s the same team from inspection to finished job, not a handoff to a subcontractor who never saw the original problem. That matters in Flatbush, where a single chimney often has three or four things wrong at once and a patch on one of them fixes nothing.
If you’re comparing quotes, ask each contractor the same question: will you show me the inside of my flue? The ones who can, will.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Flatbush
Flatbush chimneys fail in a handful of predictable ways, and each one needs a different repair rather than a longer list of everything we could sell you. Here’s what we actually do on these roofs.
Mortar Repointing
The mortar joints between brick courses take the brunt of the freeze-thaw cycle here, and on these older Brooklyn walls they often erode faster than the brick itself. Repointing means cutting out the failed mortar and packing new mortar into the joint, matched to the original so the wall keeps breathing. Skip it and water gets behind the brick, which is where the more expensive problems start.
Spalling Brick Repair
Spalling is what you see when the face of a brick has popped off and left a crumbly, recessed pocket. Soft early-20th-century brick around Flatbush is prone to it after enough wet winters, especially near the crown where water sits. We replace the damaged units with brick that matches the existing wall and address whatever’s letting water in behind them, because replacing brick without fixing the source just buys you a few more seasons.
Chimney Waterproofing
A breathable waterproofing treatment on the exterior masonry keeps liquid water out while letting moisture vapor escape from inside the brick. On Flatbush homes it’s often the single most cost-effective thing you can do after a repair, because the same freeze-thaw that caused the damage will keep working on unprotected brick. It won’t fix a cracked crown, though. Waterproofing comes after the structural work, never instead of it.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the most common source of the stains and rot people blame on the chimney itself. On the pitched rooflines of Flatbush rowhouses it’s frequently original, cracked, or step-flashed with material that’s long past its life. We replace it with proper counter-flashing and step flashing sealed into the mortar joint, so water runs off the roof instead of into the attic.
We also rebuild chimneys that are past repointing, and do tuckpointing where the joints need careful color matching. If you’re not sure which of these you’re looking at, that’s a fine reason to call our chimney repair team and let us look before anyone quotes a number.
Trusted Brands We Service in Flatbush
We install and work with materials from Gelco, Olympia Chimney, Famco, and Copperfield, plus HeatShield for flue resurfacing and DuraFlex for flexible liner replacement. These are the same professional-grade product lines restoration contractors use, not generics off a hardware store shelf, and naming them matters because the material outlasts the labor in most of these jobs. We don’t claim to keep parts stocked locally, but sourcing is straightforward and we won’t leave you waiting on a special order with a roofline open. When we quote a repair, we tell you exactly which product goes in and why.

Common Chimney Repair Problems We See in Flatbush Homes
The Flatbush failure pattern is remarkably consistent, and it’s almost never caused by the fire. It’s caused by heat cycling, freeze-thaw, and appliances connected to a stack that was never designed for them.
- Crumbling crowns and spalled brick. A mortar crown cracks from freeze-thaw over a few hard winters, water gets in behind it, and the brick just below starts spalling. Once that cycle starts it accelerates, and a crown repair done early is a fraction of the cost of a rebuild.
- Cracked clay flue tiles in undersized flues. Most of these chimneys originally served coal stoves. When the fuel changed, the tiles didn’t get bigger, and decades of heat cycling on an undersized flue crack them from the inside out. A sweep that ignores the tiles is only half the job.
- Gas boilers and fireplaces sharing one flue. This happens often in the older two-families here, and it’s hidden behind what looks like a routine cleaning call. Two appliances vented into one flue can send exhaust where it shouldn’t go, and it isn’t something you can spot from the ground.
- Unlined or parged smoke chambers. Some of these stacks were never lined at all, just parged with mortar that’s since cracked and fallen away. HeatShield resurfacing can restore a compromised flue in some cases, and a full DuraFlex liner handles the rest.
Here’s how it usually goes in a Flatbush two-family. Someone books a cleaning. A technician gets on the roof and finds a crumbling crown, spalling brick, and cracked clay tiles around a flue that a gas boiler now shares with an old fireplace. The cause is decades of freeze-thaw working on soft brick and mortar, plus heat cycling on tiles that were never sized for modern appliances. The right response is a Level 1 or Level 2 inspection with camera footage inside the flue, and a conversation about the cracked tile, the spalled courses, and the shared venting before anyone recommends repointing, crown work, waterproofing, or a reline.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Flatbush, NY
These are typical ranges for Flatbush, not quotes. The written estimate you get after the inspection sets the final price, and the estimate is free.
| Repair | Typical Flatbush range |
|---|---|
| Mortar repointing (upper chimney section) | $450 – $1,200 |
| Spalling brick repair (limited area) | $400 – $1,100 |
| Chimney crown repair or rebuild | $600 – $1,500 |
| Flashing repair or replacement | $350 – $900 |
| Chimney waterproofing | $300 – $700 |
| Partial chimney rebuild | $2,500 – $6,000 |
What moves the number: how much of the chimney is accessible from the roof, whether the repair is on a rowhouse shared wall, how many brick courses need replacing, and whether the liner is part of the fix. A repoint on a sound stack is a modest job. A crown rebuild plus a reline is not, and you should hear that difference explained before you agree to anything.
We Also Serve Cities Near Flatbush
We work throughout the neighborhoods around Flatbush as well, including Kensington, Flatlands, Crown Heights, and Midwood. The housing stock shifts a little as you move between them, but the chimneys tell the same story: coal-era flues, undersized for what’s vented into them now. If you’re just outside Flatbush, call and we’ll confirm coverage.
Serving Flatbush, NY – Our Local Coverage Area
We serve Flatbush and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Flatbush
Not safely, not without knowing what the flue looks like inside. Sweeping removes soot, but it won’t tell you whether the clay tiles are cracked or whether a gas boiler is vented into the same stack, and in these older Flatbush homes both are common. Get a Level 2 inspection with camera footage first, then decide. Call (866) 937-8201 for a free estimate.
Most crumbling crowns are a repair, not a rebuild. If the brick below the crown is sound and the flue tiles are intact, resurfacing or recasting the crown solves it. If water has been getting in long enough to spall the courses underneath, the job grows. A camera inspection plus a look at the exterior tells you which one you’re facing before you commit to either.
Ask to see the evidence. A legitimate quote comes from camera footage of your own flue and a clear explanation of which defect each line item fixes. If someone can’t show you the cracked tile or the failed flashing, don’t buy the repair. We diagnose before we quote, and we’ll tell you plainly when work can safely wait a season. Call (866) 937-8201 and we’ll walk you through it.
They can physically, and that’s exactly why the problem goes unnoticed. What matters is whether the shared venting is safe, and often it isn’t: two appliances into one undersized flue can backdraft exhaust into the home. We document the setup on camera and explain what needs to change, whether that’s separating the vents or relining. Call (866) 937-8201 to get it checked.
Yes. An unused chimney is still a structural part of the roof, and water entering through failed mortar and spalling brick damages the flue, the framing, and eventually the ceiling below. The freeze-thaw cycle doesn’t pause because there’s no fire. Waterproofing and repointing protect the structure itself, which is why we often recommend them on chimneys nobody burns in anymore.
Get a Free Chimney Repair Estimate in Flatbush
Whether it’s a crown that’s been crumbling for years or a tile you only just noticed, the first step is the same: get eyes inside the flue and see what’s actually there. Call (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Every recommendation comes with camera evidence you can look at yourself, and the written estimate sets the final price.
Written by the team at Chimney Sweep Sunset Park.