Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Park Slope
If you own a brownstone or row house in Park Slope and the fireplace has been part of your winter routine, an annual chimney inspection is the single most useful appointment you can make. We work across Park Slope regularly, from the blocks off Flatbush Avenue up toward Prospect Park, and we know what these older chimneys are built like. Our inspection team connects you with a vetted local professional who inspects, documents with a camera, and shows you the footage before recommending anything. Call (866) 937-8201 to book. We answer 24/7. Fast dispatch from 7am to 7pm.

Why Park Slope Homeowners Call Chimney Sweep Sunset Park for Chimney Inspection
The chimney trade in Park Slope runs on trust, and trust here is earned with evidence, not sales talk. Thousands of working wood-burning fireplaces sit inside the 1890s to 1910s brownstones and row houses that line this neighborhood, and their original brick flues were built with soft mortar and shallow fireboxes. Those flues need hand-scraping and a careful visual inspection, not a modern rotary sweep run blind. Our technicians have up to 11 years of experience reading exactly this kind of stock.
When we schedule an inspection in Park Slope, you get a camera inspection and a photo report included, so you see what we see. Nothing is recommended without footage you can look at yourself. We name the materials we install, from HeatShield resurfacing to DuraFlex liner systems, because the product matters as much as the labor. If the chimney can safely wait, we tell you that too. We diagnose before we quote.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Park Slope
Level 2 Inspection
This is the inspection most Park Slope brownstone owners actually need, because it goes into the flue with a camera rather than just checking what’s visible from the firebox. It covers the full flue path, the smoke chamber, the crown, and the exterior stack. On a four- or five-story row house, that means getting up on the roof and looking down, which is where the real problems usually live.
Camera Inspection
A camera inspection is how we prove what’s happening inside a flue instead of guessing. We run a camera down the flue and record it, then walk you through the footage. In Park Slope’s attached brownstones, that footage often reveals a cracked clay tile or spalled mortar you’d never see otherwise. You get the report and the photos, so a repair recommendation is something you can verify.
Flue Inspection
The flue is where creosote collects and where draft is decided. We inspect the flue for buildup, blockage, and damage, and we check how it’s venting relative to the fireplace or insert it serves. Later renovations in Park Slope sometimes added an insert or capped a flue without updating the lining, and that mismatch shows up in the flue inspection. We identify it before it becomes a carbon monoxide concern.
Level 1 and Level 3 Inspection
A Level 1 inspection is the routine annual check for a chimney that’s in known good shape and staying in service, covering what’s accessible without special tools. A Level 3 is the deep one, opened up when a Level 2 turns up something that requires access to concealed parts of the chimney. We tell you plainly which level fits your situation. We don’t sell a Level 3 when a Level 2 with a camera will do the job.
Trusted Brands We Service in Park Slope
We source and install professional-grade materials from brands that commercial and restoration contractors rely on, including HeatShield for flue resurfacing, DuraFlex for flexible liner systems, and Olympia Chimney for component work. We don’t claim to keep parts stocked on a truck, and we won’t tell you a part is on hand when it isn’t. What we do is order the right component for your flue and get it to your Park Slope home on a sensible timeline. The product line means the repair is built to last, not patched with hardware-store generics.
Common Chimney Inspection Problems We See in Park Slope Homes
- Cracked clay-tile liners. The original clay tiles in an 1890s to 1910s brownstone crack under freeze-thaw cycles, and a hairline crack lets heat and gases escape into the masonry. A camera inspection is the only honest way to confirm it, so we show you the footage before recommending a reline.
- Crumbling soft mortar in parged smoke chambers. The soft mortar used in these older chimneys spalls and restricts draft, and it’s easy to miss from the firebox alone. Party-wall chimneys get checked from the roof for exactly this reason.
- Inserts vented into stacks never designed for them. A later-added insert or a capped flue often gets connected to a stack built for a different appliance, which produces misdiagnosed draft problems. We trace the venting before anyone quotes a liner replacement.
- Crown and mortar-joint wear from freeze-thaw. The cold, damp winters here work on the exterior crown and joints every season, opening cracks that let water in. We inspect the crown and the joints on the roof, not just the flue.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Inspection in Park Slope, NY
Pricing here is set per job by the written estimate, not by a flat rate phoned in from a call center. A typical Level 1 inspection in Park Slope runs about $150 to $250, while a Level 2 inspection with a camera generally falls in the $250 to $450 range. When the camera footage shows a repair is needed, flue resurfacing with HeatShield or a DuraFlex liner runs higher, and we quote it only after you’ve seen the reason. The estimate is free and the written estimate sets the final price. Call (866) 937-8201 for an exact quote.

Shared Stacks and Original Flues: The Local Inspection Challenge
Here’s a condition you rarely find at this density outside Brooklyn’s brownstone belt. In Park Slope’s attached brownstones, chimneys are often shared stacks between neighboring row houses. That means a cracked flue tile or a blocked flue in one home can visibly affect a neighbor’s draft. We learn to check party-wall chimneys from the roof as well as from the firebox, because the symptom in your living room may start one wall over. A typical Park Slope brownstone job starts with a homeowner noticing smoke spilling into the room or a weak draft. The inspection often reveals a clay-tile liner cracked by freeze-thaw cycles or original soft mortar that has spalled and blocked the flue. A qualified local technician performs a Level 2 inspection with a camera, documents the damage, and recommends relining with a product like HeatShield or DuraFlex only when the footage clearly shows the defect. Nothing gets pushed onto you on the strength of a glance. That’s the difference between a diagnosis and a sales pitch, and it’s why evidence comes first here.
We Also Serve Cities Near Park Slope
We handle inspections and repairs in the neighborhoods around Park Slope too, including Prospect Heights, Carroll Gardens, Red Hook, and Clinton Hill. The housing stock and the freeze-thaw winters are similar throughout this part of Brooklyn, so the same careful, camera-first approach applies. If you’re just over the line from Park Slope, we can schedule you. Our chimney inspection service covers the full area.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Park Slope
Because many Park Slope brownstones share chimney stacks, so a blocked or cracked flue in one home can change the draft in the next one over. That shared condition is why we check party-wall chimneys from the roof as well as from the firebox. Call (866) 937-8201 and we’ll take a look at both sides of the stack.
Yes, if anyone is about to recommend a repair, you need to see camera footage first. A sweep cleans the flue; a camera inspection proves the condition of the liner and smoke chamber that a sweep can’t fully show. We include a camera inspection and photo report, so you’re never asked to spend on a reline sight unseen. Call (866) 937-8201 for an exact quote.
First-degree creosote is light soot you can brush away, second-degree is a glazed layer that needs more than a brush, and third-degree is hardened, concentrated creosote that’s the real fire risk. If a technician tells you it’s third-degree, ask to see it on camera. In a cold heating season here, that buildup accelerates. Call (866) 937-8201 and we’ll show you what’s in your flue.
Often yes, and a reline is usually the right fix once the footage confirms cracked tiles. HeatShield resurfacing can repair a flue that still has sound structure, while a DuraFlex liner handles a full flexible replacement. We only recommend one after you’ve seen the damage. Call (866) 937-8201 for an exact quote.
They open cracks in the crown and joints every winter, and water that gets in then freezes and widens the gaps. That’s why we inspect the crown and joints on the roof, not just the flue. Catching it early keeps a small repair from growing into masonry work. Call (866) 937-8201 for an exact quote.
Ready to book? Call (866) 937-8201 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The local pro who arrives is licensed and insured as their state requires, and nothing is recommended without camera evidence you can see for yourself.
Written by the team at Chimney Sweep Sunset Park.